GDP FPGA III
avg67·nkc·KiCad/NKC-FPGA-GDP-Tang-Nano/NKC-FPGA-GDP-Tang-Nano.kicad_pcb
About the GDP FPGA III PCB
GDP FPGA III is an open source PCB design by avg67, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 160 × 100.3 mm, with 41 components from 17 distinct parts.
Other key parts include the SN74LVC8T245. By type, the board carries 15 resistors, 12 capacitors, 5 connectors, 5 diodes and 4 ICs.
Main components on the GDP FPGA III
GDP FPGA III bill of materials (BOM)
41 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-40_W20.3mm_Socket | U1 |
| 3 | SN74LVC8T245 | SOIC-24W_7.5x15.4mm_P1.27mm | U2, U3, U4 |
| 1 | NKC-Bus | PinHeader_1x36_P2.54mm_Horizontal | J1 |
| 2 | Mini-DIN-6 | Connector_Mini-DIN_Female_6Pin_2rows | J2, J3 |
| 1 | AudioJack3 | Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J4 |
| 1 | SD_Card | SD_Hirose_DM1AA_SF_PEJ82 | J5 |
| 5 | BAT54S | SOT-23 | D1, D2, D3, D4, D5 |
| 3 | 10µF | CP_EIA-3528-21_Kemet-B | C1, C3, C4 |
| 8 | 100nF | C_1206_3216Metric | C2, C5, C6, C7, C8, C9, C11, C12 |
| 1 | 4n7 | C_1206_3216Metric | C10 |
| 5 | 120ohm | R_1206_3216Metric | R1, R2, R3, R6, R7 |
| 4 | 2.2k | R_1206_3216Metric | R4, R5, R8, R9 |
| 1 | 3k3 | R_1206_3216Metric | R10 |
| 1 | 4.7k | R_1206_3216Metric | R11 |
| 1 | 4k7 | R_1206_3216Metric | R12 |
| 2 | 10k | R_Array_SIP5 | RN1, RN2 |
| 1 | 4k7 | R_Array_SIP9 | RN3 |
GDP FPGA III design files
The KiCad project lives in the avg67/nkc repository on GitHub; these links point at the commit this page was built from.
GDP FPGA III: common questions
How big is the GDP FPGA III PCB?
The GDP FPGA III measures 160 × 100.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GDP FPGA III?
41 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the GDP FPGA III design files?
From the avg67/nkc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GDP FPGA III design in my own project?
Yes, under the terms of its GPL-3.0 license, which avg67 chose for the repository.