NKC-Ethernet
avg67·nkc·KiCad/Ethernet/ethernet.kicad_pcb
About the NKC-Ethernet PCB
NKC-Ethernet is an open source PCB design by avg67, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 32 components from 20 distinct parts.
Other key parts include the 74LS32, 74LS688, 74LVC245 and LT1086-3.3. By type, the board carries 12 capacitors, 7 ICs, 5 connectors, 5 resistors, 2 transistors and 1 switch.
Main components on the NKC-Ethernet
NKC-Ethernet bill of materials (BOM)
32 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS32 | DIP-14_W7.62mm_LongPads | IC1 |
| 1 | 74LS688 | DIP-20_W7.62mm_LongPads | IC2 |
| 3 | 74LVC245 | DIP-20_W7.62mm_LongPads | IC3, IC4, IC5 |
| 1 | LT1086-3.3 | TO-220-3_Horizontal_TabDown | U1 |
| 1 | ~ | Olimex CS8900A-H | U2 |
| 1 | BC547 | TO-92_Inline_Wide | Q1 |
| 1 | BC557 | TO-92_Inline_Wide | Q2 |
| 1 | NKC-Bus | PinHeader_1x36_P2.54mm_Horizontal | J1 |
| 1 | Jumper | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | SBHE_Jumper | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | A0_Jumper | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | 10µF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 9 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C7, C8, C9, C10 +1 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C6, C12 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 4k7 | R_Array_SIP5 | RN1 |
| 1 | 1k | R_Array_SIP9 | RN2 |
NKC-Ethernet design files
The KiCad project lives in the avg67/nkc repository on GitHub; these links point at the commit this page was built from.
NKC-Ethernet: common questions
How big is the NKC-Ethernet PCB?
The NKC-Ethernet measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NKC-Ethernet?
32 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the NKC-Ethernet design files?
From the avg67/nkc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NKC-Ethernet design in my own project?
Yes, under the terms of its GPL-3.0 license, which avg67 chose for the repository.