14 open source boards using the SN74LVC8T245
Real designs built with the SN74LVC8T245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
CM5-SODIMM-Carrier
KaiPereira
69.6 × 46.1 mm96 parts6LCERN-OHL-P-2.029NextCuboid
mattuna15
214 × 142 mm27 parts4LMIT19RISC-V
Avaja
Haimrich
70 × 15.5 mm55 parts2LMIT11FPGA
Xc17 prom prog
msinger
123 × 95 mm281 parts2LCC-BY-SA-4.03STM32
350 Flight controller
ThaoMinhHoang
98.7 × 104 mm233 parts4LNo license3GDP FPGA III
avg67
160 × 100.3 mm41 parts2LGPL-3.01RP2040/RP2350
Ds1486
tomverbeure
30.4 × 44 mm76 parts4LNo license0NXP
Modulation dependent carrier level
frohro
220 × 233 mm64 parts4LGPL-3.00- schematic only · 89 parts
Tigard
mukkasrikanth
89 partsNo license0 NextCuboid quilter
mattuna15
214 × 142 mm27 parts4LMIT19HW
AvalonSemiconductors
54.9 × 75.8 mm64 parts4LApache-2.00RP2040/RP2350
Ds1486 rp2350
tomverbeure
30.4 × 45.9 mm54 parts4LNo license0Video+Sound
aslak3
98.6 × 92.1 mm101 parts4LGPL-2.038Level shifter breakout
AvalonSemiconductors
19.7 × 32.1 mm7 parts2LApache-2.00
How designs wire the SN74LVC8T245
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74LVC8T245 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 1 µF).
- The VCCB pins have a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 91% |
|
| GNDpin 11, 12, 13 | Connected to: GND 100% | — |
| VCCBpin 23, 24 | Connected to: 3.3V 82% · a signal 18% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Video+Sound by aslak3, CM5-SODIMM-Carrier by KaiPereira, NextCuboid by mattuna15 and Avaja by Haimrich.
The SN74LVC8T245 in open source designs
The gallery holds 14 open source boards using the SN74LVC8T245 from 12 GitHub repositories; a typical one measures about 98.6 × 92.1 mm and carries around 64 components.
69% use four copper layers or more, and 71% carry an open source license.
The most starred is Video+Sound by aslak3.
Microcontrollers on boards using the SN74LVC8T245
What boards using the SN74LVC8T245 are built for
SN74LVC8T245: common questions
Where can I find a SN74LVC8T245 reference design?
Each of the 14 boards on this page is a real design using the SN74LVC8T245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC8T245 VCCA pin?
The VCCA pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LVC8T245.
What decoupling capacitors do designs use on the SN74LVC8T245 VCCB pin?
The VCCB pins have a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LVC8T245.
Which microcontrollers do boards using the SN74LVC8T245 use?
Most are built on RP2040/RP2350 (2), FPGA (1), NXP (1) and Raspberry Pi (1).
How big is a typical board using the SN74LVC8T245?
The median is 98.6 × 92.1 mm, and 31% are two-layer designs.
What is the most popular open source board using the SN74LVC8T245?
By GitHub stars, Video+Sound by aslak3, with 38 stars.
Can I simulate one of these boards using the SN74LVC8T245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.