Controller

axuscc·stm32_controller·src/controller.kicad_pcb

Controller PCB layout, top view — open source STM32 board by axuscc

About the Controller PCB

Controller is an open source STM32 PCB design by axuscc, published on GitHub. It is a 2-layer board measuring 65 × 142 mm, with 45 components from 33 distinct parts.

Its main chip is the MAX1487CSA+T, from the STM32 family. Other key parts include the KIA7812AF-RTF/P and STM32F103CBT6. By type, the board carries 16 resistors, 6 test points, 6 diodes, 4 ICs, 4 jumpers and 2 switches.

It belongs with the displays & leds designs in this gallery.

From the project

This controller will be controlled by a PLC controller via Modbs(485) requests. This controller will command a VFD Driver and read Encoder via Modbus(485).

This controller will be controlled by a PLC controller via Modbs(485) requests. This controller will command a VFD Driver and read Encoder via Modbus(485).

This controller embed 2 main features: - One modbus server for handle request from PLC. - One Modbus Client that will send requests to Encoder and Vfd.

each feature use its own USART port (USART2/USART3).

We made the development/prototyping using a Nucleo F302R8 board + a custom hat to embed signal convertion from USART to RS485.

Controller, from the project README
From the project README

Main components on the Controller

MAX1487CSA+TKIA7812AF-RTF/PSTM32F103CBT6

Controller bill of materials (BOM)

45 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX1487CSA+T
STM32F302RBT6
MAXIM
U1
1
MAX1487CSA+T
MAXIM
U2
1
KIA7812AF-RTF/P
MAX1487CSA+T
KEC Semicon
U3
1
STM32F103CBT6
U4
1
WJ15EDGRC-3.81-4P
USB_B_Mini
XKB Connection
J2
4
Jumper_2_Bridged
JP1, JP2, JP3, JP4
4
WJ15EDGRC-3.81-4P
ReliaPro
MASTER2, MASTER_1, SLAVE_1, SLAVE_2
1
SW_DIP_x01
r SHOU HAN
SW1
1
SW_Push
r SHOU HAN
SW2
1
USART1_DE
TP1
1
USART1_RX
TP2
1
USART1_TX
TP3
1
USART3_TX
TP4
1
USART3_DE
TP5
1
USART3_RX
TP6
1
1N4007
MASTER
Everlight Elec
D1
1
SLAVE
Everlight Elec
D2
1
5V
Everlight Elec
D3
1
RUN
Everlight Elec
D4
1
24V
Everlight Elec
D5
Show 13 more
QtyPartRefs
1
FAULT
Foshan NationStar
D6
2
0603B104K500NT
100n
FH
C1, C2
1
1206W4F6490T5E
10k
UNI-ROYAL
R1
1
1206W4F1200T5E
649
UNI-ROYAL
R2
1
1206W4F6490T5E
0
UNI-ROYAL
R3
2
1206W4F6490T5E
649
UNI-ROYAL
R4, R6
1
1206W4F1200T5E
0
UNI-ROYAL
R5
1
1206W4J0242T5E
0
UNI-ROYAL
R7
1
1206W4F1201T5E
10k
UNI-ROYAL
R8
1
RS-06K103JT
649
FH
R9
1
RS-06K103JT
0
FH
R10
2
RS-06K103JT
R
FH
R11, R12
4
0603WAJ0000T5E
R
UNI-ROYAL
R13, R14, R15, R16

Controller design files

The KiCad project lives in the axuscc/stm32_controller repository on GitHub; these links point at the commit this page was built from.

Controller: common questions

What microcontroller does the Controller use?

The Controller is built around the MAX1487CSA+T, from the STM32 family.

How big is the Controller PCB?

The Controller measures 65 × 142 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller?

45 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Controller design files?

From the axuscc/stm32_controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Controller design in my own project?

The repository has no license, so all rights stay with axuscc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in stm32_controller

Similar boards