Kicad bambu xa007
ayan4m1·kicad-bambu-xa007
About the Kicad bambu xa007 PCB
Kicad bambu xa007 is an open source PCB design by ayan4m1, published on GitHub under the MIT license. It is a 2-layer board measuring 32 × 20 mm, with 3 components from 3 distinct parts.
By type, the board carries 2 connectors and 1 switch.
It belongs with the robotics & motion designs in this gallery.
From the project
Open Source Power Switch Module
This is intended to serve as an OSHW version of Bambu Labs' XA007 Power Switch Module.

Kicad bambu xa007 bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Side_B | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | Side_A | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | SW_SPDT | MICRO-SWITCH | SW1 |
Kicad bambu xa007 design files
The KiCad project lives in the ayan4m1/kicad-bambu-xa007 repository on GitHub; these links point at the commit this page was built from.
- Layoutbambu-lab-xa007.kicad_pcb
- Schematicbambu-lab-xa007.kicad_sch
Kicad bambu xa007: common questions
How big is the Kicad bambu xa007 PCB?
The Kicad bambu xa007 measures 32 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad bambu xa007?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad bambu xa007 design files?
From the ayan4m1/kicad-bambu-xa007 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad bambu xa007 design in my own project?
Yes, under the terms of its MIT license, which ayan4m1 chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979