Usb hub

AYUSH-pro-grammer·usb_hub·kicad/usb_hub.kicad_pcb

Usb hub PCB layout, top view — open source board by AYUSH-pro-grammer

About the Usb hub PCB

Usb hub is an open source PCB design by AYUSH-pro-grammer, published on GitHub. It is a 2-layer board measuring 82.5 × 44 mm, with 28 components from 14 distinct parts.

Other key parts include the C42383361. By type, the board carries 7 connectors, 7 capacitors, 6 resistors, 5 diodes, 1 IC and 1 fuse.

It belongs with the usb & debug tools designs in this gallery.

From the project

Custom USB hub design that uses the FE1.1s USB hub controller. Includes one USB-C port to connect the host computer and four USB-A ports to connect different USB devices.

Custom USB hub design that uses the FE1.1s USB hub controller. Includes one USB-C port to connect the host computer and four USB-A ports to connect different USB devices.

This project provides you with the PCB design, circuit diagram, 3D enclosure design, and gerber files. This enclosure should be 3D printed in PLA filament, and it will have a wooden look.

In this project, a compact and custom USB hub design is planned which will expand one USB-C port to four USB-A ports.

Usb hub, from the project README
From the project README

Main components on the Usb hub

C42383361

Usb hub bill of materials (BOM)

28 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C42383361
FE1.1s
U1
1
C165948
USB_C_Receptacle_USB2.0_16P
J1
4
C5355659
USB_A
J2, J3, J4, J5
2
C265013
Conn_01x03
J6, J7
1
Crystal
12MHz1
1
C315901
2A
F1
1
C2286
RED
D1
4
C2994781
GREEN
D2, D3, D4, D5
4
C141660
100uF
C1, C2, C3, C4
2
C307561
10uF
C5, C7
1
C28323
1uF
C6
1
C25994
2.7K
R1
2
C23186
5.1K
R2, R3
3
C21190
1K
R4, R5, R6

Usb hub design files

The KiCad project lives in the AYUSH-pro-grammer/usb_hub repository on GitHub; these links point at the commit this page was built from.

Usb hub: common questions

How big is the Usb hub PCB?

The Usb hub measures 82.5 × 44 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb hub?

28 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Usb hub design files?

From the AYUSH-pro-grammer/usb_hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Usb hub design in my own project?

The repository has no license, so all rights stay with AYUSH-pro-grammer. Use it as a reference, and ask the author before reusing the design.

Similar boards