HardLabs

HOME ASSISTANT LIGHT SWITCH

Az154za·HOME_ASSISTANT_LIGHT_SWITCH·PCB/PCB_ESP.kicad_pcb

HOME ASSISTANT LIGHT SWITCH PCB layout, top view — open source board by Az154za
Simulate this board

About the HOME ASSISTANT LIGHT SWITCH PCB

HOME ASSISTANT LIGHT SWITCH is an open source PCB design by Az154za, published on GitHub. It is a 2-layer board measuring 96 × 61.6 mm, with 8 components from 8 distinct parts.

By type, the board carries 6 connectors and 2 diodes.

It belongs with the iot & wireless and sensors designs in this gallery.

HOME ASSISTANT LIGHT SWITCH, from the project README
From the project README

HOME ASSISTANT LIGHT SWITCH bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP_HOME_ASSISTANT
J1
1
Conn_01x19_Pin
J2
1
Servo1
J3
1
Servo2
J4
1
DHT11
J5
1
MotionSensor
J6
1
RED
D1
1
GREEN
D2

HOME ASSISTANT LIGHT SWITCH design files

The KiCad project lives in the Az154za/HOME_ASSISTANT_LIGHT_SWITCH repository on GitHub; these links point at the commit this page was built from.

HOME ASSISTANT LIGHT SWITCH: common questions

How big is the HOME ASSISTANT LIGHT SWITCH PCB?

The HOME ASSISTANT LIGHT SWITCH measures 96 × 61.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HOME ASSISTANT LIGHT SWITCH?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HOME ASSISTANT LIGHT SWITCH design files?

From the Az154za/HOME_ASSISTANT_LIGHT_SWITCH repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HOME ASSISTANT LIGHT SWITCH design in my own project?

The repository has no license, so all rights stay with Az154za. Use it as a reference, and ask the author before reusing the design.

Similar boards