Starshipraider gpdevboard
About the Starshipraider gpdevboard PCB
Starshipraider gpdevboard is an open source PCB design by azonenberg, published on GitHub under the LGPL-3.0 license. It is a 4-layer board measuring 55 × 42 mm, with 68 components from 9 distinct parts.
Other key parts include the 74LVC1T45 and TCA6424A. By type, the board carries 43 capacitors, 19 ICs, 5 connectors and 1 resistor.
From the project
Open FPGA tools
The most mature target is Silego GreenPAK4. Active work is underway for Xilinx CoolRunner-II and Cypress PSoC5LP.
Questions? Comments? Having trouble getting it to work? Join our IRC, ##openfpga on Freenode.
Main components on the Starshipraider gpdevboard
Starshipraider gpdevboard bill of materials (BOM)
68 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 18 | 74LVC1T45 | SOT23_6 | U1, U2, U3, U4, U5, U6, U7, U8 +10 |
| 1 | TCA6424A | QFN_32_0.5MM_5x5MM | U19 |
| 1 | STARSHIPRAIDER_IOBOARD_MODULE | CONN_SAMTEC_QSH-030-01-L-D-A | J1 |
| 1 | GREENPAK_DEVKIT_HDR | CONN_HEADER_2.54MM_2x10_RA_FEMALE | J2 |
| 2 | MMCX | CONN_MMCX_LINX_CONNMMCX002SMD | P1, P2 |
| 1 | CONN_01X02 | CONN_HEADER_2.54MM_1x2 | P3 |
| 37 | 0.47 uF | EIA_0402_CAP_NOSILK | C1, C2, C3, C4, C7, C8, C9, C10 +29 |
| 6 | 4.7 uF | EIA_0603_CAP_NOSILK | C5, C6, C11, C12, C17, C18 |
| 1 | 1K | EIA_0402_RES_NOSILK | R1 |
Starshipraider gpdevboard design files
The KiCad project lives in the azonenberg/openfpga repository on GitHub; these links point at the commit this page was built from.
Starshipraider gpdevboard: common questions
How big is the Starshipraider gpdevboard PCB?
The Starshipraider gpdevboard measures 55 × 42 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Starshipraider gpdevboard?
68 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Starshipraider gpdevboard design files?
From the azonenberg/openfpga repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Starshipraider gpdevboard design in my own project?
Yes, under the terms of its LGPL-3.0 license, which azonenberg chose for the repository.
