12 open source boards using the TCA6424A

Real designs built with the TCA6424A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TCA6424A

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TCA6424A connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCP pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 470 nF).
  • The VCCI pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 470 nF).
  • The SCL pin has a pull-up to 3.3V on 8 of 11 designs, most often 1.8 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 8 of 11 designs, most often 1.8 kΩ (then 4.7 kΩ).
Pin 0Connected to: GND 100%
P00pin 1Connected to: Signal 100%
  • Resistor to GND on 55% · 10 kΩ (6)
  • Series resistor on 55% · 0 Ω (4), 33 kΩ (1), 470 Ω (1)
  • Pull-up to VCC on 36% · 10 kΩ (4)
P01pin 2Connected to: Signal 100%
  • Pull-up to VCC on 36% · 10 kΩ (4)
P04pin 5Connected to: Signal 82% · not connected 18%
  • Series resistor on 55% · 10 kΩ (4), 1 kΩ (1), 470 Ω (1)
  • Resistor to GND on 45% · 18 kΩ (4), 10 kΩ (1)
P05pin 6Connected to: Signal 82% · not connected 18%
  • Pull-up to VCC on 45% · 10 kΩ (5)
P06pin 7Connected to: A connector 45%
  • Series resistor on 64% · 1 kΩ (5), 330 Ω (1), 470 Ω (1)
P07pin 8Connected to: A connector 55%
  • Series resistor on 45% · 1.8 kΩ (4), 470 Ω (1)
P10pin 9Connected to: A connector 45% · not connected 18%
  • Pull-up to VCC on 36% · 10 kΩ (4)
P12pin 11Connected to: A connector 55%, SKY13350 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (8)
P13pin 12Connected to: A connector 55%, SKY13350 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (8)
P14pin 13Connected to: A connector 55%, SKY13317 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (4)
P15pin 14Connected to: A connector 45%, SKY13317 36%, SKY13350 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (12)
P16pin 15Connected to: A connector 45%, SKY13317 36% · not connected 36%
  • Capacitor to GND on 36% · 33 pF (4)
P17pin 16Connected to: A connector 45% · not connected 27%
  • Series resistor on 55% · 10 kΩ (4), 1 kΩ (1), 470 Ω (1)
P20pin 17Connected to: A connector 55%, SKY13317 36% · not connected 18%
  • Capacitor to GND on 36% · 33 pF (8)
P21pin 18Connected to: A connector 45%, SKY13317 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (8)
P22pin 19Connected to: A connector 45%, SKY13317 36% · not connected 27%
  • Capacitor to GND on 36% · 33 pF (8)
P23pin 20Connected to: A connector 45% · not connected 27%
  • Series resistor on 45% · 10 kΩ (4), 470 Ω (1)
P24pin 21Connected to: A connector 45%, SKY13350 36% · not connected 18%
  • Capacitor to GND on 36% · 33 pF (12)
P25pin 22Connected to: A connector 45%, SKY13350 36% · not connected 18%
  • Capacitor to GND on 36% · 33 pF (8)
P26pin 23Connected to: SKY13350 36%, a connector 36% · not connected 18%
  • Capacitor to GND on 36% · 33 pF (12)
P27pin 24Connected to: RFFC5072 36%, a connector 36% · not connected 18%
  • Pull-up to VCC on 36% · 10 kΩ (4)
  • Capacitor to GND on 36% · 33 pF (4)
GNDpin 25Connected to: GND 100%
ADDRpin 26Connected to: GND 82% · a signal 18%
VCCPpin 27Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 470 nF (8), 4.7 µF (1)
RESET_Npin 28Connected to: A connector 36% · 3.3V 27%
  • Pull-up to VCC on 55% · 10 kΩ (6)
SCLpin 29Connected to: A connector 73%, SI5351C 36%
  • Pull-up to 3.3V on 73% · 1.8 kΩ (4), 4.7 kΩ (3), 1 kΩ (1)
SDApin 30Connected to: A connector 73%, SI5351C 36%
  • Pull-up to 3.3V on 73% · 1.8 kΩ (4), 4.7 kΩ (3), 1 kΩ (1)
VCCIpin 31Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 470 nF (8), 4.7 µF (1)
INT_Npin 32Connected to: A connector 36% · not connected 27%
  • Pull-up to VCC on 73% · 10 kΩ (6), 1 kΩ (1), 4.7 kΩ (1)
Pin PADConnected to: Not connected 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Starshipraider gpdevboard by azonenberg, Iob characterization v02 by azonenberg, Marblewalrus backplane by azonenberg and TestRig-PCB by RasmusB.

The TCA6424A in open source designs

The gallery holds 12 open source boards using the TCA6424A from 11 GitHub repositories; a typical one measures about 120 × 60 mm and carries around 119 components.

88% use four copper layers or more, and 75% carry an open source license.

The most starred is Starshipraider gpdevboard by azonenberg.

Microcontrollers on boards using the TCA6424A

TCA6424A: common questions

Where can I find a TCA6424A reference design?

Each of the 12 boards on this page is a real design using the TCA6424A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TCA6424A VCCP pin?

The VCCP pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 11 open source designs using the TCA6424A.

What decoupling capacitors do designs use on the TCA6424A VCCI pin?

The VCCI pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 11 open source designs using the TCA6424A.

What pull-up resistor is used on the TCA6424A SCL pin?

The SCL pin has a pull-up to 3.3V on 8 of 11 designs, most often 1.8 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the TCA6424A.

What parts are used alongside the TCA6424A?

The 74LVC1G14, AP2553W6-7, MAX2837, MGA-81563 and RFFC5072 appear in the most repositories here.

Which microcontrollers do boards using the TCA6424A use?

Most are built on STM32 (2).

How big is a typical board using the TCA6424A?

The median is 120 × 60 mm, and 13% are two-layer designs.

What is the most popular open source board using the TCA6424A?

By GitHub stars, Starshipraider gpdevboard by azonenberg, with 260 stars.

Can I simulate one of these boards using the TCA6424A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part