12 open source boards using the 74LVC1T45
Real designs built with the 74LVC1T45, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Untitled
AlaaSaadAbdo
287.8 × 126.7 mm253 parts2LCC-BY-NC-4.0189RP2040/RP2350
BusPirate-5-rev10
DangerousPrototypes
60.5 × 60 mm210 parts4LMIT124AVR/Arduino
LimeRFE
myriadrf
141.1 × 178.5 mm1325 partsNo license28STM32
Main
azonenberg
130 × 90 mm435 parts10LBSD-3-Clause17STM32
Kup lulz
azonenberg
154.5 × 137 mm376 parts4LBSD-3-Clause17STM32
USB-LiDAR-VL53L9
RemiFM
34 × 30.2 mm68 parts6LMIT9STM32
Mainboard
azonenberg
165 × 121 mm617 parts10LBSD-3-Clause7PIC
ProjectFreeCad
ananevego
90.8 × 47 mm122 parts2LNo license0Starshipraider gpdevboard
azonenberg
55 × 42 mm68 parts4LLGPL-3.0260STM32
Switch engine
azonenberg
151 × 111 mm362 parts10LBSD-3-Clause35Wizza-MX-VIK
AlaaSaadAbdo
227.5 × 87.4 mm82 parts2LCC-BY-NC-4.0189STM32
Christmas tree
azonenberg
66 × 93.5 mm61 parts2LBSD-3-Clause17
How designs wire the 74LVC1T45
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LVC1T45 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 9 of 10 designs, most often 470 nF (then 100 nF).
- The VCCB pin has a decoupling capacitor on 9 of 10 designs, most often 470 nF (then 100 nF).
- The B pin has a series resistor on 4 of 10 designs, most often 0 Ω (then 1 MΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 90% |
|
| GNDpin 2 | Connected to: GND 91% | — |
| Apin 3 | Connected to: The microcontroller 40%, a connector 20% |
|
| Bpin 4 | Connected to: A connector 30% |
|
| DIRpin 5 | Connected to: The microcontroller 30% · 3.3V 30% |
|
| VCCBpin 6 | Connected to: VCCO_GP 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Starshipraider gpdevboard by azonenberg, Untitled by AlaaSaadAbdo, BusPirate-5-rev10 by DangerousPrototypes and Switch engine by azonenberg.
The 74LVC1T45 in open source designs
The gallery holds 12 open source boards using the 74LVC1T45 from 10 GitHub repositories; a typical one measures about 135.6 × 91.8 mm and carries around 232 components.
64% use four copper layers or more, and 67% carry an open source license.
The most starred is Starshipraider gpdevboard by azonenberg.
Parts used alongside the 74LVC1T45
Microcontrollers on boards using the 74LVC1T45
What boards using the 74LVC1T45 are built for
74LVC1T45: common questions
Where can I find a 74LVC1T45 reference design?
Each of the 12 boards on this page is a real design using the 74LVC1T45. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1T45 VCCA pin?
The VCCA pin has a decoupling capacitor on 9 of 10 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the 74LVC1T45.
What decoupling capacitors do designs use on the 74LVC1T45 VCCB pin?
The VCCB pin has a decoupling capacitor on 9 of 10 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the 74LVC1T45.
What resistor goes on the 74LVC1T45 B pin?
The B pin has a series resistor on 4 of 10 designs, most often 0 Ω (then 1 MΩ). Counted from the KiCad layouts of 10 open source designs using the 74LVC1T45.
What parts are used alongside the 74LVC1T45?
The AT24MAC402, ECS-1612MV-250-CN, STM32H735-UFBGA176-25, KSZ9031RN and MYMGK00504ERSR appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1T45 use?
Most are built on STM32 (6), AVR/Arduino (1), PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the 74LVC1T45?
The median is 135.6 × 91.8 mm, and 36% are two-layer designs.
What is the most popular open source board using the 74LVC1T45?
By GitHub stars, Starshipraider gpdevboard by azonenberg, with 260 stars.
Can I simulate one of these boards using the 74LVC1T45 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.