STM32L4KC-Development-Board
B-Leadr·STM32L4KC-Development-Board·PCB/stmDevBoard.kicad_pcb
About the STM32L4KC-Development-Board
STM32L4KC-Development-Board is an open source STM32 PCB design by B-Leadr, published on GitHub. It is a 2-layer board measuring 43.6 × 30 mm, with 23 components from 16 distinct parts.
Its main chip is the STM32L432KCU6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 2 ICs, 2 switches and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A custom made mini development board for the STM32L432KC6 low power MCU.
Main components on the STM32L4KC-Development-Board
STM32L4KC-Development-Board bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 EVVO | SOT-223-3_TabPin2 | U1 |
| 1 | STM32L432KCU6 STMicroelectronics | STM32L432KCU6 | U2 |
| 1 | ABS07-32.768KHZ-T Abracon LLC | Crystal_SMD_Abracon_ABM7-2Pin_6.0x3.5mm | Y1 |
| 1 | USB4135-GF-A GCT | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | 861400041LO1705LF STLINK Amphenol ICC (FCI) | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 2 | 61301211121 Conn_01x12_Pin Würth Elektronik | PinHeader_1x12_P2.54mm_Vertical | J3, J4 |
| 1 | MJTP1243 NRST APEM Inc. | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |
| 1 | OS102011MS2QN1 C&K | SW_OS102011MS2QN1 | SW2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 3 | CL21B104KBCNNNC 100n Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 1 | CL21A475KAQNNNE 4.7u Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | CL21A106KQFNNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | CL21A226KQCLRNC 22u Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 2 | CC0805JPNPO9BN150 15pF YAGEO | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 1 | RC0805FR-0710KL 10k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 4 | RC0805JR-075K1L 5.1k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
STM32L4KC-Development-Board design files
The KiCad project lives in the B-Leadr/STM32L4KC-Development-Board repository on GitHub; these links point at the commit this page was built from.
STM32L4KC-Development-Board: common questions
What microcontroller does the STM32L4KC-Development-Board use?
The STM32L4KC-Development-Board is built around the STM32L432KCU6, from the STM32 family.
How big is the STM32L4KC-Development-Board?
The STM32L4KC-Development-Board measures 43.6 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32L4KC-Development-Board?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32L4KC-Development-Board design files?
From the B-Leadr/STM32L4KC-Development-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32L4KC-Development-Board design in my own project?
The repository has no license, so all rights stay with B-Leadr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32L4KC-Development-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k