8 open source boards using the STM32L432KCU6
Real designs built with the STM32L432KCU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sharkropad
mawaeg
83.8 × 87.6 mm101 parts2LGPL-3.039STM32
Attendance-Management-System
rajinthanr
60 × 88.5 mm87 parts2LMIT2STM32
Hoppy clock
borkdlabs
35 × 48 mm50 parts4LMIT2STM32
UGR-22 Screen
z8bi
69.2 × 50 mm70 parts2LNo license0STM32
Smart-Rover-Safety-Telemetry-Module
SaiSundarP
50 × 40 mm30 parts2LNo license0STM32
STM32L4KC-Development-Board
B-Leadr
43.6 × 30 mm23 parts2LNo license0- schematic only · 22 partsSTM32
Maze bot
danielljeon
22 parts4LNo license0 STM32
Soilchord — Geotechnical Acoustic Soil Profiler
jayis1
100 × 100 mm6 parts2LNo license0
How designs wire the STM32L432KCU6
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32L432KCU6 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF).
- The VDDA pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF).
- The PC14 pin has a crystal on 4 of 7 designs, most often 32.768 kHz.
- The PC14 pin has a capacitor to GND on 4 of 7 designs, most often 22 pF (then 6.8 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 17 | Connected to: 3.3V 77% · not connected 15% |
|
| PC14pin 2 | Connected to: Signal 71% |
|
| PC15pin 3 | Connected to: Signal 86% |
|
| NRSTpin 4 | Connected to: A connector 43% · not connected 29% |
|
| VDDApin 5 | Connected to: 3.3V 86% |
|
| VSSpin 16, 32, 33 | Connected to: GND 88% | — |
| PA8pin 18 | Connected to: A connector 33% · not connected 17% |
|
| PB6pin 29 | Connected to: Not connected 50% · a signal 50% |
|
| PB7pin 30 | Connected to: Not connected 50% · a signal 50% |
|
| PH3pin 31 | Connected to: Signal 67% · not connected 33% |
|
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sharkropad by mawaeg, Hoppy clock by borkdlabs, Attendance-Management-System by rajinthanr and STM32L4KC-Development-Board by B-Leadr.
The STM32L432KCU6 in open source designs
The gallery holds 8 open source boards using the STM32L432KCU6 from 8 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 40 components.
75% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Sharkropad by mawaeg.
Microcontrollers on boards using the STM32L432KCU6
What boards using the STM32L432KCU6 are built for
STM32L432KCU6: common questions
Where can I find a STM32L432KCU6 reference design?
Each of the 8 boards on this page is a real design using the STM32L432KCU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32L432KCU6 VDD pin?
The VDD pins have a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32L432KCU6.
What decoupling capacitors do designs use on the STM32L432KCU6 VDDA pin?
The VDDA pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32L432KCU6.
How is the STM32L432KCU6 PC14 pin connected?
The PC14 pin has a crystal on 4 of 7 designs, most often 32.768 kHz. Counted from the KiCad layouts of 7 open source designs using the STM32L432KCU6.
Which microcontrollers do boards using the STM32L432KCU6 use?
Most are built on STM32 (8).
How big is a typical board using the STM32L432KCU6?
The median is 60 × 50 mm, and 75% are two-layer designs.
What is the most popular open source board using the STM32L432KCU6?
By GitHub stars, Sharkropad by mawaeg, with 39 stars.
Can I simulate one of these boards using the STM32L432KCU6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.