Bkwedding lantern
b-schd·bkwedding-lantern·pcb_lantern/pcb_lantern.kicad_pcb
About the Bkwedding lantern PCB
Bkwedding lantern is an open source TI MSP430/CC PCB design by b-schd, published on GitHub. It is a 2-layer board measuring 27.9 × 50.5 mm, with 42 components from 24 distinct parts.
Its main chip is the MSP430FR2110, from the TI MSP430/CC family. Other key parts include the ME2188. By type, the board carries 19 resistors, 5 transistors, 5 capacitors, 4 diodes, 2 ICs and 2 switches.
From the project
Project files for wedding lantern
********** ### Requirements - KiCad >= v7.0 - Code Composer Studio >= v10

Main components on the Bkwedding lantern
Bkwedding lantern bill of materials (BOM)
42 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSP430FR2110 | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | ME2188 | SOT-23 | U2 |
| 5 | SI2302 | SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | BATT1, PROG1 |
| 1 | Conn_02x04_Pin | PinHeader_2x04_P2.54mm_Vertical_SMD | JUMP1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | POWER1 |
| 2 | SW_SPST | SW_Push_1P1T_XKB_TS-1187A | SW2, SW3 |
| 1 | RED | LED_PLCC_2835_Handsoldering | D1 |
| 1 | GREEN | LED_PLCC_2835_Handsoldering | D2 |
| 1 | BLUE | LED_PLCC_2835_Handsoldering | D3 |
| 1 | WHITE | LED_PLCC_2835_Handsoldering | D4 |
| 1 | 22u | L_Taiyo-Yuden_NR-50xx | L1 |
| 1 | 1n | C_0402_1005Metric | C1 |
| 1 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10u | CP_EIA-3216-18_Kemet-A | C4 |
| 1 | 100u | CP_EIA-3528-21_Kemet-B | C5 |
| 1 | 47k | R_0402_1005Metric | R1 |
| 1 | 24 | R_0805_2012Metric | R4 |
| 1 | 8.2 | R_0603_1608Metric | R5 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10 | R_0603_1608Metric | R6, R7 |
| 6 | 1M | R_0402_1005Metric | R8, R11, R13, R15, R22, R23 |
| 4 | 100 | R_0402_1005Metric | R9, R10, R12, R14 |
| 4 | 270k | R_0402_1005Metric | R17, R18, R19, R20 |
Bkwedding lantern design files
The KiCad project lives in the b-schd/bkwedding-lantern repository on GitHub; these links point at the commit this page was built from.
Bkwedding lantern: common questions
What microcontroller does the Bkwedding lantern use?
The Bkwedding lantern is built around the MSP430FR2110, from the TI MSP430/CC family.
How big is the Bkwedding lantern PCB?
The Bkwedding lantern measures 27.9 × 50.5 mm, has 2 copper layers and is 1.646 mm thick.
How many components are on the Bkwedding lantern?
42 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bkwedding lantern design files?
From the b-schd/bkwedding-lantern repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bkwedding lantern design in my own project?
The repository has no license, so all rights stay with b-schd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bkwedding lantern without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021