Pcb pico proto pboard

bablokb·pcb-pico-proto-pboard·pico-proto-pboard.kicad/pico-proto-pboard.kicad_pcb

Pcb pico proto pboard layout, top view — open source board by bablokb

About the Pcb pico proto pboard

Pcb pico proto pboard is an open source PCB design by bablokb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 88 × 65 mm, with 10 components from 7 distinct parts.

By type, the board carries 7 resistors, 2 connectors and 1 transistor.

It belongs with the dev boards & breakouts, audio and displays & leds designs in this gallery.

From the project

Plug&Play PCB for the Pico and Standard Hardware-Breakouts

Protoyping Board for the Raspberry Pi Pico ==========================================

This is a small prototyping board for the Pico. Besides the normal 2x20 through holes for the Pico, the PCB also provides additional sockets for the connection of peripherals.

The idea of this board is to simplify software-development for standard breakouts, because it provides sockets for these components and thus no wiring is necessary.

Pcb pico proto pboard, from the project README
From the project README

Pcb pico proto pboard bill of materials (BOM)

10 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AO3401A
Q1
1
C393941
Micro_SD_TF_PUSH
J4
1
C21260844
Conn_EYESPI
J14
4
10K
R1, R2, R3, R5
1
15K
R4
1
56K
R6
1
43K
R7

Pcb pico proto pboard design files

The KiCad project lives in the bablokb/pcb-pico-proto-pboard repository on GitHub; these links point at the commit this page was built from.

Pcb pico proto pboard: common questions

How big is the Pcb pico proto pboard?

The Pcb pico proto pboard measures 88 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb pico proto pboard?

10 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb pico proto pboard design files?

From the bablokb/pcb-pico-proto-pboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pcb pico proto pboard design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which bablokb chose for the repository.

Similar boards