Imx415 for openipc

BaktiyarBr·imx415_for_openipc

Imx415 for openipc PCB layout, top view — open source board by BaktiyarBr

About the Imx415 for openipc PCB

Imx415 for openipc is an open source PCB design by BaktiyarBr, published on GitHub. It is a 4-layer board measuring 24 × 19 mm, with 28 components from 11 distinct parts.

Other key parts include the IMX415-AAQR-C, LP5907MFX-2.9, LP5907MFX-1.8 and TLV74311PDBVR. By type, the board carries 23 capacitors, 4 ICs and 1 connector.

From the project

A compact KiCad sensor board that breaks out the Sony IMX415 (8.4 MP, 4-lane MIPI CSI-2) CMOS image sensor for use with OpenIPC based IP-camera SoCs. It carries the sensor, the three supply rails it needs, and a single fine-pitch board-to-board connector to the host board.

A compact KiCad sensor board that breaks out the Sony IMX415 (8.4 MP, 4-lane MIPI CSI-2) CMOS image sensor for use with OpenIPC based IP-camera SoCs. It carries the sensor, the three supply rails it needs, and a single fine-pitch board-to-board connector to the host board.

- Sony IMX415-AAQR-C sensor in a 110-pin BGA - 4-lane MIPI CSI-2 data interface (D0–D3 + clock), I²C control, MCLK and reset lines - On-board LDOs for the sensor rails: - LP5907MFX-2.9 → 2.9 V analog - LP5907MFX-1.8 → 1.8 V interface - TLV74311PDBVR → 1.1 V digital core - 0402 passives, decoupling next to the sensor supply…

Main components on the Imx415 for openipc

IMX415-AAQR-CLP5907MFX-2.9LP5907MFX-1.8TLV74311PDBVR

Imx415 for openipc bill of materials (BOM)

28 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
IMX415-AAQR-C
null
U1
1
LP5907MFX-2.9
U2
1
LP5907MFX-1.8
U3
1
TLV74311PDBVR
U4
1
DF56C-26S-0.3V_51_
J1
7
100N
100n
C1, C4, C8, C10, C14, C16, C17
8
1u
C2, C5, C11, C13, C15, C20, C21, C24
3
4.7U
4.7u
C3, C7, C9
2
10N
10n
C6, C12
2
100N
1u
C22, C25
1
10U
1u
C31

Imx415 for openipc design files

The KiCad project lives in the BaktiyarBr/imx415_for_openipc repository on GitHub; these links point at the commit this page was built from.

Imx415 for openipc: common questions

How big is the Imx415 for openipc PCB?

The Imx415 for openipc measures 24 × 19 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Imx415 for openipc?

28 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Imx415 for openipc design files?

From the BaktiyarBr/imx415_for_openipc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Imx415 for openipc design in my own project?

The repository has no license, so all rights stay with BaktiyarBr. Use it as a reference, and ask the author before reusing the design.