8 open source boards using the TLV74311PDBVR
Real designs built with the TLV74311PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Ecp5-dev board
medhyal
68 × 43 mm107 parts4LNo license10Raspberry Pi
Pi-Pico-NiceRF-LR2021
jlpoltrack30 × 50 mm32 parts2LGPL-3.01RP2040/RP2350
Anarchytechnobox
edwindertien
132.6 × 100 mm236 parts4LNo license0RP2040/RP2350
Skeeball premium re
mikenemat
116.7 × 85.7 mm208 parts4LNo license0Raspberry Pi
Thegoose
Marsgate
68.2 × 32 mm117 parts6LNo license0RP2040/RP2350
C64 & VIC20 Flash Programmer Dave Gaunt
dgaunt48
100 × 100 mm80 parts2LNo license0Imx415 for openipc
BaktiyarBr
24 × 19 mm28 parts4LNo license0RP2040/RP2350
Dimmer
edwindertien
105.4 × 76.5 mm94 parts2LNo license0
How designs wire the TLV74311PDBVR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV74311PDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 3.3V on 7 of 7 designs.
- The EN pin is tied to 3.3V on 7 of 7 designs.
- The OUT pin is tied to 1.1V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 3.3V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 3.3V 100% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| OUTpin 5 | Connected to: 1.1V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ecp5-dev board by medhyal, Pi-Pico-NiceRF-LR2021 by jlpoltrack, Imx415 for openipc by BaktiyarBr and C64 & VIC20 Flash Programmer Dave Gaunt by dgaunt48.
The TLV74311PDBVR in open source designs
The gallery holds 8 open source boards using the TLV74311PDBVR from 7 GitHub repositories; a typical one measures about 84.1 × 63.3 mm and carries around 101 components.
63% use four copper layers or more, and 13% carry an open source license.
The most starred is Ecp5-dev board by medhyal.
Microcontrollers on boards using the TLV74311PDBVR
What boards using the TLV74311PDBVR are built for
TLV74311PDBVR: common questions
Where can I find a TLV74311PDBVR reference design?
Each of the 8 boards on this page is a real design using the TLV74311PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV74311PDBVR IN pin connected?
The IN pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV74311PDBVR.
How is the TLV74311PDBVR EN pin connected?
The EN pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV74311PDBVR.
How is the TLV74311PDBVR OUT pin connected?
The OUT pin is tied to 1.1V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV74311PDBVR.
Which microcontrollers do boards using the TLV74311PDBVR use?
Most are built on RP2040/RP2350 (4), Raspberry Pi (2) and FPGA (1).
How big is a typical board using the TLV74311PDBVR?
The median is 84.1 × 63.3 mm, and 38% are two-layer designs.
What is the most popular open source board using the TLV74311PDBVR?
By GitHub stars, Ecp5-dev board by medhyal, with 10 stars.
Can I simulate one of these boards using the TLV74311PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.