3 open source boards using the LP5907MFX-1.8
Real designs built with the LP5907MFX-1.8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT377
OneInchEye
39 × 39 mm79 parts4LMIT346
STM32StarlightEye
39 × 39 mm111 parts4LMIT318
The LP5907MFX-1.8 in open source designs
The gallery holds 3 open source boards using the LP5907MFX-1.8 from 3 GitHub repositories; a typical one measures about 39 × 39 mm and carries around 106 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is FourThirdsEye by will127534.
Parts used alongside the LP5907MFX-1.8
Microcontrollers on boards using the LP5907MFX-1.8
What boards using the LP5907MFX-1.8 are built for
LP5907MFX-1.8: common questions
Where can I find a LP5907MFX-1.8 reference design?
Each of the 3 boards on this page is a real design using the LP5907MFX-1.8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LP5907MFX-1.8?
The AP3418KTR-G1, ICM-42688-P, TCA9406DC, TMP117AIDRVR and TPS7A90 appear in the most repositories here.
Which microcontrollers do boards using the LP5907MFX-1.8 use?
Most are built on STM32 (1).
How big is a typical board using the LP5907MFX-1.8?
The median is 39 × 39 mm, and 0% are two-layer designs.
What is the most popular open source board using the LP5907MFX-1.8?
By GitHub stars, FourThirdsEye by will127534, with 377 stars.
Can I simulate one of these boards using the LP5907MFX-1.8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.