Ardor
balazsbencs·ardor·buffer/buffer.kicad_pcb
About the Ardor PCB
Ardor is an open source PCB design by balazsbencs, published on GitHub under the MIT license. It is a 2-layer board measuring 37 × 20.5 mm, with 20 components from 14 distinct parts.
Other key parts include the AMS1117-5.0 and TL072. By type, the board carries 8 capacitors, 8 resistors, 2 ICs and 1 diode.
It belongs with the audio and displays & leds designs in this gallery.
From the project
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.
This folder contains the minimal guitar input buffer for Ardor.
Use this board between a passive guitar and the Raspberry Pi Codec Zero. Do not connect a passive guitar directly to the Codec Zero input.
Open buffer.kicadpro` in KiCad to view or edit the schematic and PCB.
Connect the guitar jack to GUITARIN. Connect GUITAROUT to the Codec Zero input. Follow buffer.kicadsch` for power and ground.
Main components on the Ardor
Ardor bill of materials (BOM)
20 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | B_IN | Pin_D1.0mm_L10.0mm_LooseFit | BUFFER_IN1 |
| 1 | SS14 | D_SMA | D1 |
| 1 | 100PF 100pF | C_0603_1608Metric | C1 |
| 3 | 1u | C_0603_1608Metric | C2, C5, C6 |
| 1 | 1NF 1nF | C_0603_1608Metric | C3 |
| 1 | 2N2 2n2 | C_0603_1608Metric | C4 |
| 2 | 100NF 100nF | C_0603_1608Metric | C8, C10 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 2 | 1M | R_0603_1608Metric | R2, R4 |
| 1 | 3K3 3k3 | R_0603_1608Metric | R3 |
| 1 | 100R | R_0603_1608Metric | R5 |
| 3 | 100K 100k | R_0603_1608Metric | R6, R7, R8 |
Ardor design files
The KiCad project lives in the balazsbencs/ardor repository on GitHub; these links point at the commit this page was built from.
Ardor: common questions
How big is the Ardor PCB?
The Ardor measures 37 × 20.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ardor?
20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ardor design files?
From the balazsbencs/ardor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ardor design in my own project?
Yes, under the terms of its MIT license, which balazsbencs chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k