Smart Safety Tag Charging Adapter

balu-16·SeedGrant_Safety·smart-safety-tag-v1/hardware/charging-adapter/charging-adapter.kicad_pcb

Smart Safety Tag Charging Adapter PCB layout, top view — open source board by balu-16

About the Smart Safety Tag Charging Adapter PCB

Smart Safety Tag Charging Adapter is an open source PCB design by balu-16, published on GitHub. It is a 2-layer board measuring 32 × 22 mm, with 14 components from 12 distinct parts.

Other key parts include the TPS259530DSGR. By type, the board carries 5 resistors, 3 connectors, 3 capacitors, 2 diodes and 1 IC.

It belongs with the rf & radio designs in this gallery.

From the project

Editable KiCad design and prototype fabrication package for a BLE safety tag and its protected pogo charging adapter. The tag uses an ESP32-S3-MINI-1-N4R2, PDM microphone, LIS2DW12, MAX17048, protected 400 mAh battery, physical SOS button, RGB LED and vibration motor. The phone s

Editable KiCad design and prototype fabrication package for a BLE safety tag and its protected pogo charging adapter. The tag uses an ESP32-S3-MINI-1-N4R2, PDM microphone, LIS2DW12, MAX17048, protected 400 mAh battery, physical SOS button, RGB LED and vibration motor. The phone supplies GPS and Internet access.

Both boards are routed and checked with KiCad 10.0.6. PCB DRC has no ignored rules, violations, unconnected items or schematic-parity findings. ERC reports have zero errors and warnings under KiCad's default checks; the four ERC diagnostics listed in each report remain ignored by…

Main components on the Smart Safety Tag Charging Adapter

Smart Safety Tag Charging Adapter bill of materials (BOM)

14 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS259530DSGR
Espressif
U1
1
USB4125-GF-A
USB-C 5V input
Molex
J1
1
0900-1-15-20-75-14-11-0
TAG +5V
P1
1
0900-1-15-20-75-14-11-0
TAG GND
P2
2
TPD1E10B06DYAR
Texas Instruments
D1, D2
1
C1608X7R1E105K080AE
1uF 25V X7R
TDK
C1
1
C1608X7R2A332K080AA
3.3nF 100V X7R
TDK
C2
1
C1608X7R1C105K080AC
1uF 16V X7R
TDK
C3
2
RC0603FR-075K1L
5.1k 1%
Yageo
R1, R2
1
RC0603FR-07200KL
200k 1%
Yageo
R3
1
RC0603FR-07100KL
100k 1%
Yageo
R4
1
RC0603FR-072K8L
2.8k 1%
Yageo
R5

Smart Safety Tag Charging Adapter design files

The KiCad project lives in the balu-16/SeedGrant_Safety repository on GitHub; these links point at the commit this page was built from.

Smart Safety Tag Charging Adapter: common questions

How big is the Smart Safety Tag Charging Adapter PCB?

The Smart Safety Tag Charging Adapter measures 32 × 22 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Smart Safety Tag Charging Adapter?

14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart Safety Tag Charging Adapter design files?

From the balu-16/SeedGrant_Safety repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart Safety Tag Charging Adapter design in my own project?

The repository has no license, so all rights stay with balu-16. Use it as a reference, and ask the author before reusing the design.

More boards in SeedGrant_Safety

Similar boards