Termometr
bambuchaAdm·termometr·pcb/termometr.kicad_pcb
About the Termometr PCB
Termometr is an open source STM32 PCB design by bambuchaAdm, published on GitHub. It is a 2-layer board measuring 43.9 × 88 mm, with 98 components from 26 distinct parts.
Its main chip is the STM32M030F4, from the STM32 family. Other key parts include the LT1009, MCP6031, PT100, MCP6N16 and MCP3421A0T-E/CH. By type, the board carries 53 resistors, 17 transistors, 15 capacitors, 11 ICs and 1 connector.
From the project
Simple analog termometr
Main components on the Termometr
Termometr bill of materials (BOM)
98 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT1009 | TO-92_Inline_Narrow_Oval | U1 |
| 1 | MCP6031 | MSOP-8_3x3mm_Pitch0.65mm | U2 |
| 1 | PT100 | Pin_Header_Straight_2x02 | U3 |
| 1 | MCP6N16 | MSOP-8_3x3mm_Pitch0.65mm | U4 |
| 1 | MCP3421A0T-E/CH | SOT-23-6 | U5 |
| 1 | STM32M030F4 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U6 |
| 2 | HEF4544B | DIP-16_W7.62mm_LongPads | U7, U11 |
| 2 | 3x8 | 3x7segment | U8, U9 |
| 1 | LM1117 | SOT-223 | U10 |
| 11 | MMBT2222ALT1G | SOT-23 | Q1, Q2, Q3, Q4, Q6, Q10, Q11, Q14 +3 |
| 6 | FDV304P | SOT-23 | Q5, Q7, Q8, Q9, Q12, Q13 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch3.96mm_Friction_Lock | P3 |
| 1 | 3305SMD-10K | 3305SMD | RV1 |
| 4 | 100n | C_0805_HandSoldering | C1, C2, C6, C8 |
| 7 | 100n | C_1206_HandSoldering | C3, C4, C5, C10, C12, C14, C15 |
| 1 | 10u | C_1206_HandSoldering | C7 |
| 3 | 1n | C_1206_HandSoldering | C9, C11, C13 |
| 1 | 3k6 | R_1206_HandSoldering | R1 |
| 1 | 2k49 | R_0805_HandSoldering | R2 |
| 1 | 10 | R_0805_HandSoldering | R3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1k | R_0805_HandSoldering | R4, R5, R7 |
| 3 | 47k | R_0805_HandSoldering | R6, R10, R11 |
| 2 | 10k | R_0805_HandSoldering | R8, R9 |
| 20 | 10k | R_1206_HandSoldering | R12, R13, R14, R19, R20, R22, R24, R26 +12 |
| 5 | 10 | R_1206_HandSoldering | R15, R16, R18, R25, R34 |
| 17 | 100 | R_1206_HandSoldering | R17, R40, R41, R42, R43, R44, R45, R46 +9 |
Termometr design files
The KiCad project lives in the bambuchaAdm/termometr repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/termometr.kicad_pcb
Termometr: common questions
What microcontroller does the Termometr use?
The Termometr is built around the STM32M030F4, from the STM32 family.
How big is the Termometr PCB?
The Termometr measures 43.9 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Termometr?
98 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Termometr design files?
From the bambuchaAdm/termometr repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Termometr design in my own project?
The repository has no license, so all rights stay with bambuchaAdm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Termometr without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k