4 open source boards using the MCP6N16
Real designs built with the MCP6N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
RMTS-Hardware
reilleya
78.1 × 50.2 mm82 parts2LNo license14STM32
Termometr
bambuchaAdm
43.9 × 88 mm98 parts2LNo license0RMTS-Lite
Terrapin-Rocket-Team
44 × 26 mm23 parts2LNo license0NXP
RMTS-Replacement
Terrapin-Rocket-Team
48 × 68 mm19 parts2LNo license0
The MCP6N16 in open source designs
The gallery holds 4 open source boards using the MCP6N16 from 3 GitHub repositories; a typical one measures about 46 × 59.1 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RMTS-Hardware by reilleya.
Parts used alongside the MCP6N16
MCP6N16: common questions
Where can I find a MCP6N16 reference design?
Each of the 4 boards on this page is a real design using the MCP6N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6N16 use?
Most are built on NXP (2) and STM32 (1).
How big is a typical board using the MCP6N16?
The median is 46 × 59.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6N16?
By GitHub stars, RMTS-Hardware by reilleya, with 14 stars.
Can I simulate one of these boards using the MCP6N16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.