29 open source boards using the LM1117

Real designs built with the LM1117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

29 boardsClear filters|Most starred

How designs wire the LM1117

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the LM1117 connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pins is tied to 3.3V on 76% of them (not connected on 3, GND on 2, a signal on 3).
GNDpin 1Connected to: GND 65% · a signal 25%
3V3pin 2, 4Connected to: 3.3V 76%
VCCpin 3Connected to: 5V 85%
  • Decoupling capacitor on 35% · 10 µF (5), 100 nF (2), 100 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet 2 by Duet3D, Saturn by numato, Nuco v by dmitrystu and Breakout and Prog by INTI-CMNB.

The LM1117 in open source designs

The gallery holds 29 open source boards using the LM1117 from 21 GitHub repositories; a typical one measures about 101.6 × 82.5 mm and carries around 98 components.

100% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is Duet 2 by Duet3D.

Microcontrollers on boards using the LM1117

LM1117: common questions

Where can I find a LM1117 reference design?

Each of the 29 boards on this page is a real design using the LM1117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM1117 3V3 pin connected?

The 3V3 pins is tied to 3.3V on 76% of them (not connected on 3, GND on 2, a signal on 3). Counted from the KiCad layouts of 21 open source designs using the LM1117.

What parts are used alongside the LM1117?

The 24C16, DS1307, L293D, LCD-jhd12864e-xl and 40PIN_Breakout appear in the most repositories here.

Which microcontrollers do boards using the LM1117 use?

Most are built on AVR/Arduino (6), STM32 (3), NXP (3) and ESP8266 (2).

How big is a typical board using the LM1117?

The median is 101.6 × 82.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM1117?

By GitHub stars, Duet 2 by Duet3D, with 258 stars.

Can I simulate one of these boards using the LM1117 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part