Simple InGaAs Photodetector

bartekp-i·Simple_InGaAs_Photodetector·KiCad 9.0 Project/InGaAs Photodetector.kicad_pcb

Simple InGaAs Photodetector PCB layout, top view — open source board by bartekp-i

About the Simple InGaAs Photodetector PCB

Simple InGaAs Photodetector is an open source PCB design by bartekp-i, published on GitHub. It is a 2-layer board measuring 36.1 × 35.1 mm, with 9 components from 9 distinct parts.

By type, the board carries 5 capacitors, 2 connectors and 1 resistor.

It belongs with the test & measurement and power & battery designs in this gallery.

From the project

This repository documents how the photodetector was built, starting from developing a electronic circuit and a PCB as well as assembly and tests(ongoing)

The circuit implements a high-bandwidth, low-noise reverse-biased InGaAs photodetector topology designed to extract fast electrical transients from optical signals.

Why: Applying a +12V reverse bias across the photodiode significantly widens its internal depletion region. This minimizes the junction capacitance ($C_j$), which is the primary limiting factor for high-speed photodetector bandwidth. The electrical bandwidth is governed by:

Simple InGaAs Photodetector, from the project README
From the project README

Simple InGaAs Photodetector bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
CON-SMA-EDGE-SRP
J1
1
Conn_02x04_Odd_Even
J2
1
~
PD1
1
10uF
C1
1
6u8F
C2
1
47pF
C3
1
2pF
C4
1
10pF
C5
1
1k
R1

Simple InGaAs Photodetector design files

The KiCad project lives in the bartekp-i/Simple_InGaAs_Photodetector repository on GitHub; these links point at the commit this page was built from.

Simple InGaAs Photodetector: common questions

How big is the Simple InGaAs Photodetector PCB?

The Simple InGaAs Photodetector measures 36.1 × 35.1 mm, has 2 copper layers and is 1.59 mm thick.

How many components are on the Simple InGaAs Photodetector?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Simple InGaAs Photodetector design files?

From the bartekp-i/Simple_InGaAs_Photodetector repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Simple InGaAs Photodetector design in my own project?

The repository has no license, so all rights stay with bartekp-i. Use it as a reference, and ask the author before reusing the design.

Similar boards