SDT board

bartkepl·SDT_board·pcb/SDT_board.kicad_pcb

SDT board layout, top view — open source STM32 board by bartkepl

About the SDT board

SDT board is an open source STM32 PCB design by bartkepl, published on GitHub under the MIT license. It is a 4-layer board measuring 75.7 × 34 mm, with 35 components from 16 distinct parts.

Its main chip is the STM32C071CBTx, from the STM32 family. Other key parts include the USBLC6-2SC6, LDI1117-3.3U, TMP117xxDRV and SHT4x. By type, the board carries 15 capacitors, 7 resistors, 5 ICs, 4 diodes, 3 connectors and 1 fuse.

It belongs with the sensors, displays & leds and test & measurement designs in this gallery.

From the project

Benchtop thermometer with SCPI and USB.

Benchtop USB thermometer with a SCPI interface and an 8-character LED display, built around an STM32C071CBT6 (ARM Cortex-M0+). Measures temperature (and optionally humidity), shows it on the display, and exposes a full instrument control interface over USB.

- [x] First revision of schematic and PCB done - [x] PCB and parts ordered - [x] Prototypes assembled and tested - [x] Firmware (v3.1)

SDT board, from the project README
From the project README

Main components on the SDT board

SDT board bill of materials (BOM)

35 components, 16 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
LDI1117-3.3U
U2
1
TMP117xxDRV
U4
1
STM32C071CBTx
U5
1
SHT4x
U6
1
USB_B
J1
2
SFV4R-3STBE1HLF
J4, J5
1
Polyfuse
F1
2
HDLO-2416
D1, D4
1
SMF5.0CA
D2
1
LED
D3
15
100nF
C1, C2, C3, C4, C5, C6, C7, C9 +7
2
22R
R1, R2
1
2K
R3
2
100K
R4, R5
2
10k
R6, R7

SDT board design files

The KiCad project lives in the bartkepl/SDT_board repository on GitHub; these links point at the commit this page was built from.

SDT board: common questions

What microcontroller does the SDT board use?

The SDT board is built around the STM32C071CBTx, from the STM32 family.

How big is the SDT board?

The SDT board measures 75.7 × 34 mm, has 4 copper layers and is 1.5862 mm thick.

How many components are on the SDT board?

35 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the SDT board design files?

From the bartkepl/SDT_board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SDT board design in my own project?

Yes, under the terms of its MIT license, which bartkepl chose for the repository.

Can I test firmware for the SDT board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards