5 open source boards using the OLED_128x32_I2C
Real designs built with the OLED_128x32_I2C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
YM2151 VGM STM32
AidanHockey5
156.9 × 67.3 mm52 parts2LAGPL-3.081STM32
Believotronics
Believotron
88.9 × 142.2 mm81 parts2LMIT8YM2151 VGM STM32
cas70240
156.9 × 67.3 mm52 parts2LAGPL-3.00PCB1005-KnobCore
Believotron
160 × 75.5 mm41 parts2LMIT5PCB1012-Horz Quad Joy
Believotron
160 × 75.5 mm41 parts2LMIT5
The OLED_128x32_I2C in open source designs
The gallery holds 5 open source boards using the OLED_128x32_I2C from 4 GitHub repositories; a typical one measures about 156.9 × 75.5 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is YM2151 VGM STM32 by AidanHockey5.
Parts used alongside the OLED_128x32_I2C
Microcontrollers on boards using the OLED_128x32_I2C
What boards using the OLED_128x32_I2C are built for
OLED_128x32_I2C: common questions
Where can I find a OLED_128x32_I2C reference design?
Each of the 5 boards on this page is a real design using the OLED_128x32_I2C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the OLED_128x32_I2C?
The BluePill_STM32F103C, CH340G, LD1117, LM2596S-5.0 and LTC6903 appear in the most repositories here.
Which microcontrollers do boards using the OLED_128x32_I2C use?
Most are built on STM32 (1).
How big is a typical board using the OLED_128x32_I2C?
The median is 156.9 × 75.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the OLED_128x32_I2C?
By GitHub stars, YM2151 VGM STM32 by AidanHockey5, with 81 stars.
Can I simulate one of these boards using the OLED_128x32_I2C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.