Tracker shield
bendelathouwer·asset-tracker·tracker shield/tracker shield/tracker shield.kicad_pcb
About the Tracker shield
Tracker shield is an open source AVR/Arduino PCB design by bendelathouwer, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 8 components from 5 distinct parts.
Its main chip is the Arduino_1pin, from the AVR/Arduino family.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
diy asset tracker
Tracker shield bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
Tracker shield design files
The KiCad project lives in the bendelathouwer/asset-tracker repository on GitHub; these links point at the commit this page was built from.
Tracker shield: common questions
What microcontroller does the Tracker shield use?
The Tracker shield is built around the Arduino_1pin, from the AVR/Arduino family.
How big is the Tracker shield?
The Tracker shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tracker shield?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tracker shield design files?
From the bendelathouwer/asset-tracker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tracker shield design in my own project?
The repository has no license, so all rights stay with bendelathouwer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tracker shield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in asset-tracker
ESP32
Lora tracker V3
bendelathouwer
116.3 × 114.5 mm66 parts2LNo license0ESP32
LoRa tracker
bendelathouwer
116.3 × 114.5 mm53 parts2LNo license0Som asset tracker
bendelathouwer
100 × 100 mm44 parts2LNo license0Som asset tracker small
bendelathouwer
39.5 × 53.6 mm38 parts2LNo license0ESP32
Quadkey
bendelathouwer
42.1 × 72.6 mm20 parts2LNo license0- schematic only · 19 partsSTM32
Voedings switcher
bendelathouwer
19 partsNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k