Echessboard
benjibst·echessboard·hardware/echessboard.kicad_pcb
About the Echessboard PCB
Echessboard is an open source STM32 PCB design by benjibst, published on GitHub. It is a 2-layer board measuring 205 × 170 mm, with 157 components from 17 distinct parts.
Its main chip is the STM32F030C6TX, from the STM32 family. Other key parts include the USBLC6-2P6, XC6206PXXXMR and MCP2221AXST. By type, the board carries 47 capacitors, 20 resistors, 11 diodes, 5 switches, 4 ICs and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
electronic chess board schematic and PCB layout using STM32 microcontroller and hall sensors for detecting pieces
https://benjibst.github.io/pdfs/echessboard_report.pdf
Main components on the Echessboard
Echessboard bill of materials (BOM)
157 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030C6TX STM32F030C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | XC6206PXXXMR XC6206PxxxMR | SOT-23-3 | U4 |
| 1 | MCP2221AXST MCP2221AxST | TSSOP-14_4.4x5mm_P0.65mm | U5 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 64 | SM351LT | SOT-23 | H1, H2, H3, H4, H5, H6, H7, H8 +56 |
| 4 | TCA9535PWR | TSSOP-24_4.4x7.8mm_P0.65mm | IO1, IO2, IO3, IO4 |
| 5 | SW_Push | SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5 |
| 11 | C2286 ~ | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +3 |
| 1 | 100R | L_0603_1608Metric | FB1 |
| 2 | 1UF 1uF | C_0805_2012Metric | C37, C38 |
| 2 | 10UF 10uF | C_1206_3216Metric | C39, C40 |
| 43 | 100NF 100nF | C_0603_1608Metric | C41, C42, C43, C44, C45, C46, C47, C201 +35 |
| 3 | 10K | R_0603_1608Metric | R5, R6, R14 |
| 2 | 5K1 | R_0603_1608Metric | R7, R8 |
| 3 | 3K3 | R_0603_1608Metric | R9, R10, R11 |
| 12 | 1K | R_0603_1608Metric | R12, R13, R15, R16, R17, R18, R19, R20 +4 |
Echessboard design files
The KiCad project lives in the benjibst/echessboard repository on GitHub; these links point at the commit this page was built from.
Echessboard: common questions
What microcontroller does the Echessboard use?
The Echessboard is built around the STM32F030C6TX, from the STM32 family.
How big is the Echessboard PCB?
The Echessboard measures 205 × 170 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Echessboard?
157 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Echessboard design files?
From the benjibst/echessboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Echessboard design in my own project?
The repository has no license, so all rights stay with benjibst. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Echessboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k