Raccoon tap
About the Raccoon tap PCB
Raccoon tap is an open source PCB design by BenjiTrapp, published on GitHub. It is a 4-layer board measuring 58 × 36 mm, with 33 components from 22 distinct parts.
Other key parts include the RTL8153B-VB-CG, AP2112K-3.3TRG1 and SY8089AAAC. By type, the board carries 21 capacitors, 5 resistors, 3 ICs, 2 connectors, 1 crystal and 1 inductor.
From the project
Red Team hardware implant — RPi4/CM4 inline Ethernet tap with PoE, dual cover identities (Cisco Phone / HP Printer), 802.1X NAC bypass, and Sliver C2
Red Team network hardware implant built on a Raspberry Pi 4 with a custom PCB HAT, running ParrotOS (ARM64). Designed for authorized penetration testing engagements.
The Raccoon Implant is an inline Ethernet tap that bridges two network ports on a custom HAT and captures traffic transparently while providing remote C2 access. The entire device is powered via PoE from the upstream switch port. It presents itself as either a Cisco IP Phone or an HP network printer to blend into enterprise infrastructure.
Main components on the Raccoon tap
Raccoon tap bill of materials (BOM)
33 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTL8153B-VB-CG RTL8153B | QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U3 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | SY8089AAAC | SOT-23-5 | U6 |
| 1 | 25MHZ 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HR911105A LPJG16402AQNL | RJ45_LPJG16402AQNL | J2 |
| 1 | USB3-A-Plug | USB3_A_Plug_Wuerth_692112030100_Horizontal | J3 |
| 1 | LQM21FN4R7M 2.2uH | L_1210_3225Metric | L2 |
| 1 | CL21A106KOQNNNG 10uF | C_0805_2012Metric | C1 |
| 1 | CL21A106KOQNNNG 100nF | C_0402_1005Metric | C2 |
| 1 | UVR1H101MDD1TD 10uF | C_0805_2012Metric | C3 |
| 1 | UVR1H101MDD1TD 22uF | C_0805_2012Metric | C4 |
| 1 | CL05B104KO5NNNC 1uF | C_0603_1608Metric | C5 |
| 1 | CL05B104KO5NNNC 10uF | C_0603_1608Metric | C6 |
| 4 | CL05B104KO5NNNC 100nF | C_0402_1005Metric | C7, C8, C9, C10 |
| 2 | CL21A226MQQNNNG 100nF | C_0402_1005Metric | C11, C12 |
| 2 | CL05C100JB5NNNC 100nF | C_0402_1005Metric | C13, C14 |
| 5 | 100nF | C_0402_1005Metric | C15, C16, C17, C18, C21 |
| 2 | 39pF | C_0402_1005Metric | C19, C20 |
| 1 | RC0402FR-0710KL 10.0K | R_0402_1005Metric | R5 |
| 1 | RC0402FR-0710KL 15.0K | R_0402_1005Metric | R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC0402FR-071KL 1K | R_0402_1005Metric | R7, R8 |
| 1 | RC0402FR-075K1L 2.49K | R_0402_1005Metric | R11 |
Raccoon tap design files
The KiCad project lives in the BenjiTrapp/TrashPandaPaws repository on GitHub; these links point at the commit this page was built from.
Raccoon tap: common questions
How big is the Raccoon tap PCB?
The Raccoon tap measures 58 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Raccoon tap?
33 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Raccoon tap design files?
From the BenjiTrapp/TrashPandaPaws repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Raccoon tap design in my own project?
The repository has no license, so all rights stay with BenjiTrapp. Use it as a reference, and ask the author before reusing the design.
