38 open source boards using the SY8089AAAC
Real designs built with the SY8089AAAC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT669OtterCastAmp
Ottercast
96 × 100 mm250 parts4LMIT341XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229ESP32
Tokay lite
maxlab-io
70 × 70 mm146 parts4LCERN-OHL-P-2.0129ESP32
MaxLab AI Camera
Valar-Systems
70 × 70 mm146 parts4LCERN-OHL-S-2.0112OtterCam s3
Jana-Marie
49.8 × 49.8 mm155 parts4LCERN-OHL-S-2.065USB-GIGABIT Rev D
OLIMEX
54.5 × 19 mm49 parts4LNo license15RP2040/RP2350
Dino z80
rh1tech
99.5 × 80 mm258 parts4LGPL-3.03Ch569evb
SdtElectronics
72 × 48.7 mm60 parts4LNo license3TI MSP430/CC
LCSC TaishanPi RK3566
theBrutzler
85 × 63.4 mm477 parts6LNo license1ESP32
AiPocket-Kicad-ESP32-P4-seconde
zycero
55 × 55 mm152 parts4LNo license1ESP32
H3S-Dev-V1
hobbyiot
85 × 56 mm79 parts2LMIT1ESP32
ELISTARS
R-Mutura
102 × 86.3 mm281 parts4LNo license0ESP32
V3sDevBoard
sentoxo
100 × 85 mm163 parts4LMIT0ESP32
AiPocket-Kicad-ESP32-P4
torykit
55 × 55 mm152 parts4LNo license0Displinux
Ivansquark
57.9 × 65.4 mm152 parts2LNo license0ESP32
Export board
zeugmaster
60 × 110 mm127 parts4LCERN-OHL-S-2.00Slimarm hypericum
jlywxy
50 × 33.5 mm126 parts4LGPL-2.00EdgeCubeH3
sentoxo
52 × 52 mm124 parts6LCERN-OHL-W-2.00ESP32
STRATOSDRONES
equationstratos
38 × 74 mm109 parts4LMIT0STM32
GeoLock
sudo-junkie
75.1 × 62.9 mm91 parts2LGPL-2.00ESP32
Poc.mp3
thaimin01
55.2 × 102.2 mm90 parts4LNo license0ESP32
SuperNice
laemo10
75 × 85 mm54 parts4LNo license0ESP32
Esp32-bluetooth erm accel dongle faulty
manhoosbilli1
23.3 × 28.4 mm50 parts4LNo license0Esp32s3-gnss base station
vuquangtrong
108 × 108 mm49 parts4LNo license0ESP32
Esp32-dongle v0-1-ceramic antenna
manhoosbilli1
11 × 50.8 mm47 parts4LNo license0Minix box
frogshead
50 × 20 mm14 parts2LNo license0RP2040/RP2350
Frank next
rh1tech
99 × 54 mm245 parts4LGPL-3.065USB-GIGABIT Rev E
OLIMEX
51.5 × 19 mm49 parts4LNo license15Raccoon tap
BenjiTrapp
58 × 36 mm33 parts4LNo license4RP2040/RP2350
Xt8086 beta
rh1tech
99.5 × 80 mm239 parts4LGPL-3.03XassetteAsterisk
Ivansquark
56 × 56 mm137 parts2LNo license0ESP32
Nucula v2
zeugmaster
60 × 110 mm127 parts4LCERN-OHL-S-2.00Slarm zero awa20.1
jlywxy
49.9 × 40.7 mm124 parts4LGPL-2.00USB-GIGABIT Rev C
OLIMEX
51.5 × 19 mm48 parts4LNo license15RP2040/RP2350
Frank next proto
rh1tech
80.6 × 54 mm204 parts4LGPL-3.03
How designs wire the SY8089AAAC
Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the SY8089AAAC connects to, and the resistors, capacitors and other passives placed on it.
- The LX pin has a inductor on 28 of 29 designs, most often 2.2 µH (then 10 µH).
- The IN pin has a capacitor to GND on 27 of 29 designs, most often 10 µF (then 100 nF).
- The FB pin has a resistor to GND on 25 of 29 designs, most often 15 kΩ (then 215 kΩ).
- The FB pin has a pull-up to 3.3V on 22 of 29 designs, most often 100 kΩ (then 680 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: Signal 62% · 5V 38% |
|
| GNDpin 2 | Connected to: GND 97% | — |
| LXpin 3 | Connected to: Signal 97% |
|
| INpin 4 | Connected to: Signal 52% · 5V 48% |
|
| FBpin 5 | Connected to: Signal 93% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OtterCastAudioV2 by Ottercast, OtterCastAmp by Ottercast, XassetteAsterisk by SdtElectronics and Tokay lite pcb by maxlab-io.
The SY8089AAAC in open source designs
The gallery holds 38 open source boards using the SY8089AAAC from 30 GitHub repositories; a typical one measures about 59 × 56 mm and carries around 132 components.
84% use four copper layers or more, and 55% carry an open source license.
The most starred is OtterCastAudioV2 by Ottercast.
Parts used alongside the SY8089AAAC
Microcontrollers on boards using the SY8089AAAC
What boards using the SY8089AAAC are built for
SY8089AAAC: common questions
Where can I find a SY8089AAAC reference design?
Each of the 38 boards on this page is a real design using the SY8089AAAC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SY8089AAAC LX pin connected?
The LX pin has a inductor on 28 of 29 designs, most often 2.2 µH (then 10 µH). Counted from the KiCad layouts of 29 open source designs using the SY8089AAAC.
How is the SY8089AAAC IN pin connected?
The IN pin has a capacitor to GND on 27 of 29 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 29 open source designs using the SY8089AAAC.
What resistor goes on the SY8089AAAC FB pin?
The FB pin has a resistor to GND on 25 of 29 designs, most often 15 kΩ (then 215 kΩ). Counted from the KiCad layouts of 29 open source designs using the SY8089AAAC.
What parts are used alongside the SY8089AAAC?
The USBLC6-2SC6, XC6206PXXXMR, AllWinner-S3(FBGA-234), AP1511B and AP6236 appear in the most repositories here.
Which microcontrollers do boards using the SY8089AAAC use?
Most are built on ESP32 (15), RP2040/RP2350 (5), STM32 (1) and TI MSP430/CC (1).
How big is a typical board using the SY8089AAAC?
The median is 59 × 56 mm, and 16% are two-layer designs.
What is the most popular open source board using the SY8089AAAC?
By GitHub stars, OtterCastAudioV2 by Ottercast, with 669 stars.
Can I simulate one of these boards using the SY8089AAAC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.