G-meter

bernienor·G-meter

G-meter PCB layout, top view — open source board by bernienor

About the G-meter PCB

G-meter is an open source PCB design by bernienor, published on GitHub. It is a 4-layer board measuring 47 × 54 mm, with 25 components from 6 distinct parts.

Other key parts include the LP2985-3.3. By type, the board carries 11 resistors, 9 capacitors, 4 ICs and 1 connector.

It belongs with the sensors and test & measurement designs in this gallery.

From the project

Simple electronics to drive a analog instrument. Amplifies the output from an accelerometer. The output current is linear to the voltage output from the accelerometer.

Main components on the G-meter

G-meter bill of materials (BOM)

25 components, 6 distinct parts.

QtyPartRefs
2
~
U1, U2
1
~
U3
1
LP2985-3.3
U4
1
Conn_01x02_Pin
J1
9
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +1
11
R
R1, R2, R3, R4, R5, R6, R7, R8 +3

G-meter design files

The KiCad project lives in the bernienor/G-meter repository on GitHub; these links point at the commit this page was built from.

G-meter: common questions

How big is the G-meter PCB?

The G-meter measures 47 × 54 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the G-meter?

25 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the G-meter design files?

From the bernienor/G-meter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the G-meter design in my own project?

The repository has no license, so all rights stay with bernienor. Use it as a reference, and ask the author before reusing the design.

Similar boards