Remote
About the Remote PCB
Remote is an open source PCB design by bieber, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 32 × 31 mm, with 7 components from 5 distinct parts.
By type, the board carries 2 resistors and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
CapyTimer is meant to be a simple timer for boxing/kickboxing/grappling/fitness. My goal is to keep its interface as simple as possible while maintaining the most important functionality. Work and rest times are set with dials, and the timing started and stopped with a switch or
CapyTimer is meant to be a simple timer for boxing/kickboxing/grappling/fitness. My goal is to keep its interface as simple as possible while maintaining the most important functionality. Work and rest times are set with dials, and the timing started and stopped with a switch or button. The display counts the remaining time, the current round, and nothing else.
Remote bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x07_Female | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_01x01_Female | PinHeader_1x01_P2.54mm_Vertical | JANT1 |
| 1 | Conn_01x02_Female | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | JPOWER1 |
| 2 | SW_Push | SW_PUSH_6mm | SWSTART1, SWSTOP1 |
| 2 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Remote design files
The KiCad project lives in the bieber/capytimer repository on GitHub; these links point at the commit this page was built from.
Remote: common questions
How big is the Remote PCB?
The Remote measures 32 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remote?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Remote design files?
From the bieber/capytimer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Remote design in my own project?
Yes, under the terms of its GPL-3.0 license, which bieber chose for the repository.
More boards in capytimer
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k