HardLabs

RPi4 WigleBottle v2

bkobe·RPi4_WigleBottle_v2

RPi4 WigleBottle v2 PCB layout, top view — open source board by bkobe
Simulate this board

About the RPi4 WigleBottle v2 PCB

RPi4 WigleBottle v2 is an open source PCB design by bkobe, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 57.2 × 45.8 mm, with 20 components from 14 distinct parts.

By type, the board carries 8 connectors, 4 diodes, 4 capacitors and 4 resistors.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Raspberry Pi 4 Wigle Bottle USB 2 Breakout Board

DISCLAIMER: I do not accept responsibility for use of the board, other than intended as a breakout board to increase spacing of hardware ports of a stock Raspberry Pi 4 single board computer. Use at your own risk. With that said, Let's get into the build...

This board increases the spacing of the traditional Raspberry Pi 4 USB 2 ports (does not support USB 3 on the ports that do -- for reasons later on). Primary design of the board is for an https://wigle.net collector using USB dongles as data sources (WiFi, Bluetooth, GPS) in a portable form factor. Boards are shared on OSH Park and can be…

RPi4 WigleBottle v2, from the project README
From the project README

RPi4 WigleBottle v2 bill of materials (BOM)

20 components, 14 distinct parts.

QtyPartRefs
1
USB_A_1
P1
1
USB_A_2
P2
1
USB_A_3
P3
1
USB_A_4
P4
1
USB_A_5
P5
1
USB_A_6
P6
1
USB_A_7
P7
1
USB_A_8
P8
1
VBus1
D1
1
VBus2
D2
1
VBus3
D3
1
VBus4
D4
4
100n
C1, C2, C3, C4
4
1k
R1, R2, R3, R4

RPi4 WigleBottle v2 design files

The KiCad project lives in the bkobe/RPi4_WigleBottle_v2 repository on GitHub; these links point at the commit this page was built from.

RPi4 WigleBottle v2: common questions

How big is the RPi4 WigleBottle v2 PCB?

The RPi4 WigleBottle v2 measures 57.2 × 45.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RPi4 WigleBottle v2?

20 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the RPi4 WigleBottle v2 design files?

From the bkobe/RPi4_WigleBottle_v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RPi4 WigleBottle v2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which bkobe chose for the repository.

Similar boards