ATF150x uDEV
bkw777·ATF150x_uDEV·PCB/ATF150x_uDEV.kicad_pcb
About the ATF150x uDEV PCB
ATF150x uDEV is an open source PCB design by bkw777, published on GitHub under the Custom license license. It is a 2-layer board measuring 50.8 × 20.3 mm, with 13 components from 7 distinct parts.
Other key parts include the ATF1504ASL-25AU44. By type, the board carries 4 capacitors, 3 connectors, 2 LEDs, 2 resistors, 1 IC and 1 jumper.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Tiny dev board for ATF1502AS(V)(L)-xAx44 and ATF1504AS(V)(L)-xAx44
Tiny dev board for Atmel/Microchip ATF1502 & ATF1504 TQFP-44.
For C1-C4 use anything from 0.22u to 1u.
JTAG pin 6 may optionally be connected to IC pin 38 (OE1#/VPP) by the VPP solder jumper. ATF150x_uPRG has a matching option to output 12v VPP on JTAG pin 6.

Main components on the ATF150x uDEV
ATF150x uDEV bill of materials (BOM)
13 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATF1504ASL-25AU44 ATF150x-xAx44 | VQFP44 | U1 |
| 1 | SBH11-PBPC-D05-ST-BK Altera JTAG-A+VPP | IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 2 | PRPC020SAAN-RC 1x20x2.54mm | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | PRPC002SBBN-M71RC VCC | PinHeader_1x02_P2.54mm_Horizontal | JP1 |
| 2 | LG_R971-KN-1-0-20-R18 GRN | LED_0805 | LED1, LED2 |
| 4 | CL21B105KOFNNWE 1u | C_0805 | C1, C2, C3, C4 |
| 2 | RMCF0805FT10K0 10k | R_0805 | R1, R2 |
ATF150x uDEV design files
The KiCad project lives in the bkw777/ATF150x_uDEV repository on GitHub; these links point at the commit this page was built from.
ATF150x uDEV: common questions
How big is the ATF150x uDEV PCB?
The ATF150x uDEV measures 50.8 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATF150x uDEV?
13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ATF150x uDEV design files?
From the bkw777/ATF150x_uDEV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ATF150x uDEV design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979