Bmt avanza iot testing

bligede·bmt-avanza-iot-testing·hardware/bmt-can-logger.kicad_sch

This repository ships a schematic but no board layout.

Simulate this board

About the Bmt avanza iot testing PCB

Bmt avanza iot testing is an open source PCB design by bligede, published on GitHub. It is a board, with 61 components from 44 distinct parts.

Other key parts include the TI LM2576HVT-5.0, TI LM2576HVT-ADJ and NXP TJA1051T/3. By type, the board carries 16 resistors, 9 capacitors, 8 connectors, 8 diodes, 5 jumpers and 4 transistors.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

Satu papan untuk dua peran, dirakit dan disolder sendiri:

Satu papan untuk dua peran, dirakit dan disolder sendiri:

Status: rancangan, belum pernah diproduksi. Rangkaian sudah diperiksa secara otomatis (lihat §7), tetapi berkasnya belum pernah dibuka di KiCad maupun EasyEDA. Keduanya belum terpasang di mesin tempat berkas ini dibuat. Sebelum memesan PCB, kerjakan dulu daftar di §8.

Semua GPIO sama dengan firmware yang sudah jalan. Firmware uji tidak perlu diubah.

Main components on the Bmt avanza iot testing

TI LM2576HVT-5.0 TI LM2576HVT-ADJ NXP TJA1051T/3

Bmt avanza iot testing bill of materials (BOM)

61 components, 44 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	TI LM2576HVT-5.0 LM2576HVT-5.0	TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical	U1
1	TI LM2576HVT-ADJ LM2576HVT-ADJ	TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical	U2
1	NXP TJA1051T/3 TJA1051T/3	SOIC-8_3.9x4.9mm_P1.27mm	U3
1	IRLZ44N	TO-220-3_Vertical	Q1
1	2N7000	TO-92_Inline	Q2
2	BSS138	SOT-23	Q3, Q4
1	Phoenix MKDS 1,5/2-5.08 (or any 5.08 mm 2-way) 12V IN	TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	J1
1	Phoenix MKDS 1,5/3-5.08 OBD-II CAN	TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal	J2
1	GPS NEO-6M	PinHeader_1x04_P2.54mm_Vertical	J3
1	DHT22	PinHeader_1x03_P2.54mm_Vertical	J4
1	FAN	PinHeader_1x02_P2.54mm_Vertical	J5
1	A7670C	PinHeader_1x07_P2.54mm_Vertical	J6
1	2.54 mm female socket 1x22 DevKitC-1 J1	PinSocket_1x22_P2.54mm_Vertical	J10
1	2.54 mm female socket 1x22 DevKitC-1 J3	PinSocket_1x22_P2.54mm_Vertical	J11
1	Bourns MF-RX160/72 MF-RX160/72		F1
1	MODEM SUPPLY	PinHeader_1x03_P2.54mm_Vertical	JP1
1	TERM BENCH ONLY	PinHeader_1x02_P2.54mm_Vertical	JP2
1	FAN VOLTAGE	PinHeader_1x03_P2.54mm_Vertical	JP3
1	VREF=3V3	PinHeader_1x02_P2.54mm_Vertical	JP4
1	AUTO-ON	PinHeader_1x02_P2.54mm_Vertical	JP5

Show 24 more

Qty	Part	Footprint	Refs
1	BUTTON	SW_PUSH_6mm	SW1
1	VIN_P	TestPoint_THTPad_D2.0mm_Drill1.0mm	TP1
1	GND	TestPoint_THTPad_D2.0mm_Drill1.0mm	TP2
1	+5V	TestPoint_THTPad_D2.0mm_Drill1.0mm	TP3
1	+4V0	TestPoint_THTPad_D2.0mm_Drill1.0mm	TP4
3	1N5822	D_DO-201AD_P15.24mm_Horizontal	D1, D7, D8
1	Littelfuse 1.5KE27A 1.5KE27A	D_DO-201_P15.24mm_Horizontal	D2
2	1N5819	D_DO-41_SOD81_P10.16mm_Horizontal	D3, D5
1	Nexperia PESD2CAN PESD2CAN	SOT-23	D4
1	LED R/G CC	LED_D5.0mm-3	D6
2	100uH 3A		L1, L2
1	100uF 50V	CP_Radial_D8.0mm_P3.50mm	C1
1	100nF 50V	C_Disc_D5.0mm_W2.5mm_P5.00mm	C2
1	1000uF 16V	CP_Radial_D10.0mm_P5.00mm	C3
4	100nF	C_Disc_D5.0mm_W2.5mm_P5.00mm	C4, C7, C8, C9
1	1000uF 10V	CP_Radial_D10.0mm_P5.00mm	C5
1	2200uF 10V	CP_Radial_D12.5mm_P5.00mm	C6
1	2k2 1%	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1
1	1k 1%	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R2
2	1k	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R3, R15
6	10k	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R4, R6, R11, R12, R13, R14
1	120R	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R5
3	330R	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R7, R9, R10
2	100k	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R8, R16

Bmt avanza iot testing design files

The KiCad project lives in the bligede/bmt-avanza-iot-testing repository on GitHub; these links point at the commit this page was built from.

Schematichardware/bmt-can-logger.kicad_sch
BOMhardware/bom.csv

Bmt avanza iot testing: common questions

How many components are on the Bmt avanza iot testing?

61 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bmt avanza iot testing design files?

From the bligede/bmt-avanza-iot-testing repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Bmt avanza iot testing design in my own project?

The repository has no license, so all rights stay with bligede. Use it as a reference, and ask the author before reusing the design.

Similar boards