Melodieklingel
boert·Melodieklingel·Leiterplatte/Melodieklingel_FA86.kicad_pcb
About the Melodieklingel PCB
Melodieklingel is an open source PCB design by boert, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 30 components from 24 distinct parts.
By type, the board carries 14 resistors, 9 capacitors and 5 diodes.
It belongs with the retro computing designs in this gallery.
From the project
Leiterplatte für die Melodieklingel nach der Veröffentlichung von S. Lehmann im Funkamateur 4/86
Leiterplatte für die Melodieklingel nach der Veröffentlichung von S. Lehmann im Funkamateur 4/86
Der zweite Anschluss des Lautsprechers muß mit +5V (TP5) verbunden werden.
Alle Messungen erfolgten mit einem 8 Ohm-Kleinlautsprecher.
Hinweis: Da bei D4 nicht alle Eingänge beschaltet wurden, kann es beim Einsatz von 74HCT74 zu Fehlfunktionen kommen. Bei Verwendung von DL074/74LS74 sollte es keine Probleme geben.

Melodieklingel bill of materials (BOM)
30 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAY17 | D_E-Line_P2.5mm_Vertical | VD1 |
| 1 | NPN | T_E-Line_Wide_P2.5mm_Vertical | VT1 |
| 1 | D104D | DIP-14_W7.62mm_LongPads | D1 |
| 1 | U880D | DIP-40_W15.24mm_LongPads | D2 |
| 1 | U2716 | DIP-24_W15.24mm_LongPads | D3 |
| 1 | D174D | DIP-14_W7.62mm_LongPads | D4 |
| 1 | MB104 | DIP-6_W7.62mm_LongPads | D100 |
| 1 | 470nF | C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C1 |
| 1 | 47µF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | 100µF | CP_Radial_D8.0mm_P3.50mm | C4 |
| 4 | 33nF | C_Disc_D8.0mm_W2.5mm_P5.00mm | C5, C10, C11, C100 |
| 1 | 10µF | CP_Axial_L21.0mm_D8.0mm_P28.00mm_Horizontal | C6 |
| 1 | 100 | Potentiometer_Bourns_3296W_Vertical | R1 |
| 1 | 180 | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R3 |
| 1 | 1,2k | R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_Vertical | R4 |
| 2 | 4,7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R5, R100 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6, R9 |
| 2 | 1k | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R7, R8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R10 |
| 1 | 11 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R11 |
| 1 | 1,2k | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R12 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R101 |
Melodieklingel design files
The KiCad project lives in the boert/Melodieklingel repository on GitHub; these links point at the commit this page was built from.
Melodieklingel: common questions
How big is the Melodieklingel PCB?
The Melodieklingel measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Melodieklingel?
30 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Melodieklingel design files?
From the boert/Melodieklingel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Melodieklingel design in my own project?
The repository has no license, so all rights stay with boert. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k