Arm PDB
boilerrobotics·Arm_PDB
About the Arm PDB PCB
Arm PDB is an open source PCB design by boilerrobotics, published on GitHub. It is a 6-layer board measuring 304.8 × 165.1 mm, with 63 components from 15 distinct parts.
By type, the board carries 9 test points, 8 speakers, 6 connectors and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
Power Distribution Board for our Robotic Arm
Arm PDB bill of materials (BOM)
63 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Conn_02x10_Top_Bottom | PinHeader_2x10_P2.54mm_Vertical | J1, J2, J3 |
| 3 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J4, J5, J6 |
| 2 | Conn_01x02_Male | AMASS_XT60-M_1x02_P7.20mm_Vertical | 5V1, 12V1 |
| 6 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | EN1, EN2, EN3, EN4, EN5, EN6 |
| 8 | Conn_02x01 | PinHeader_1x02_P2.54mm_Vertical | LS1, LS2, LS3, LS4, LS5, LS6, LS7, LS8 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | ODPow1 |
| 2 | Conn_01x04 | PinHeader_1x05_P2.54mm_Vertical | OD_Encoder_Inp1, OD_Encoder_Out1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | OD_Mot_Inp1 |
| 1 | Conn_01x03 | AMASS_MR30PW-M_1x03_P3.50mm_Horizontal | OD_Mot_Out1 |
| 11 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | PI1, PI_Sens1_Inp1, PI_Sens1_Out1, PI_Sens2_Inp1, PI_Sens2_Out1, PI_Sens3_Inp1, PI_Sens3_Out1, PI_Sens4_Inp1 +3 |
| 6 | R_US | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | PUR1, PUR2, PUR3, PUR4, PUR5, PUR6 |
| 3 | Screw_Terminal_01x06 | TerminalBlock_bornier-6_P5.08mm | RC1_ST1, RC2_ST1, RC3_ST1 |
| 9 | TestPoint_Probe | TestPoint_Bridge_Pitch2.54mm_Drill0.7mm | TP18, TP22, TP23, TP27, TP28, TP31, TP41, TP44 +1 |
| 6 | Conn_01x02_Male | AMASS_XT30U-M_1x02_P5.0mm_Vertical | XT1, XT2, XT3, XT4, XT5, XT6 |
| 1 | C | C_0201_0603Metric | C1 |
Arm PDB design files
The KiCad project lives in the boilerrobotics/Arm_PDB repository on GitHub; these links point at the commit this page was built from.
- LayoutGitHub_Board.kicad_pcb
- SchematicGitHub_Board.kicad_sch
Arm PDB: common questions
How big is the Arm PDB PCB?
The Arm PDB measures 304.8 × 165.1 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Arm PDB?
63 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arm PDB design files?
From the boilerrobotics/Arm_PDB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arm PDB design in my own project?
The repository has no license, so all rights stay with boilerrobotics. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979