Teensy 32 tx breakout board v2
About the Teensy 32 tx breakout board v2
Teensy 32 tx breakout board v2 is an open source NXP PCB design by bombarie, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 46.2 × 18.3 mm, with 16 components from 8 distinct parts.
Its main chip is the Teensy3.2_backpack, from the NXP family. By type, the board carries 5 connectors, 5 resistors, 4 capacitors, 1 IC and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
Main components on the Teensy 32 tx breakout board v2
Teensy 32 tx breakout board v2 bill of materials (BOM)
16 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.2_backpack | Teensy30_31_32_outside_pins | U1 |
| 5 | Conn_01x03_Female | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J1, J2, J3, J4, J5 |
| 1 | LED | LED_1206_3216Metric | D1 |
| 1 | 4.7uf | C_0603_1608Metric | C1 |
| 3 | 47uf | C_0603_1608Metric | C2, C3, C4 |
| 1 | 2.2k | R_0603_1608Metric | R1 |
| 3 | 22 | R_0603_1608Metric | R2, R3, R4 |
| 1 | 330 | R_1206_3216Metric | R5 |
Teensy 32 tx breakout board v2 design files
The KiCad project lives in the bombarie/jaha-koo-eel repository on GitHub; these links point at the commit this page was built from.
Teensy 32 tx breakout board v2: common questions
What microcontroller does the Teensy 32 tx breakout board v2 use?
The Teensy 32 tx breakout board v2 is built around the Teensy3.2_backpack, from the NXP family.
How big is the Teensy 32 tx breakout board v2?
The Teensy 32 tx breakout board v2 measures 46.2 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Teensy 32 tx breakout board v2?
16 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Teensy 32 tx breakout board v2 design files?
From the bombarie/jaha-koo-eel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Teensy 32 tx breakout board v2 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Teensy 32 tx breakout board v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in jaha-koo-eel
ESP32XIAO ESP32C3
21 × 17.8 mm67 parts4LCC-BY-NC-4.01
ESP32Eel head pcbs assembly v03
53.1 × 24.4 mm19 parts2LCC-BY-NC-4.01
Adafruit Feather M4 Express breakout board
51.9 × 24.1 mm14 parts2LCC-BY-NC-4.01
ESP32Eel esp32 switch host board v02
20.3 × 25 mm13 parts2LCC-BY-NC-4.01
Earlier revisions in the repo: Teensy_32_tx_breakout_board
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532