Can uart board
bpmasc·can-uart-board·hardware/kicad/can_uart_board_00/can_uart_board.kicad_pcb
About the Can uart board
Can uart board is an open source STM32 PCB design by bpmasc, published on GitHub. It is a 2-layer board measuring 58 × 45 mm, with 59 components from 30 distinct parts.
Its main chip is the STM32F091RBTx, from the STM32 family. Other key parts include the FT232RL, TLV1117_33_SOT223, TPS2400_SOT23_5 and MAX3051. By type, the board carries 21 capacitors, 17 resistors, 6 connectors, 6 diodes, 5 ICs and 1 transistor.
From the project
Version 0.0.1
Main components on the Can uart board
Can uart board bill of materials (BOM)
59 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232RL | SSOP-28_5.3x10.2mm_Pitch0.65mm | U10 |
| 1 | TLV1117_33_SOT223 | SOT-23-5 | U11 |
| 1 | TPS2400_SOT23_5 | SOT-23-5 | U13 |
| 1 | MAX3051 | SOT-23-8 | U40 |
| 1 | STM32F091RBTx | LQFP-64_10x10mm_Pitch0.5mm | U^20 |
| 1 | CPH3462_SOT23_3 | SOT-23 | Q10 |
| 1 | Crystal | Crystal_HC18-U_Vertical | Y20 |
| 1 | USB_B_Mini | USB_Mini-B | J11 |
| 2 | Conn_01x04_Male | Pin_Header_Straight_1x04_Pitch2.54mm | J20, J21 |
| 1 | Micro_SD_Card_Det | MicroSd_Wurth_693072010801 | J30 |
| 2 | Conn_01x04_Male | JST_GH_SM04B-GHS-TB_04x1.25mm_Angled | J40, J41 |
| 1 | SW_Push_Dual | SW_SPST_B3S-1000 | SW20 |
| 1 | D_Zener | D_0603 | D10 |
| 4 | LED | LED_0603 | D11, D12, D13, D20 |
| 1 | NUP2105L | SOT-23 | D40 |
| 1 | Ferrite_Bead | L_0805 | FB0 |
| 2 | C | C_0603 | C10, C11 |
| 4 | 0.1u | C_0603 | C12, C13, C15, C40 |
| 4 | 4.7u | C_0603 | C14, C16, C28, C200 |
| 1 | 0.01u | C_0603 | C17 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP | CP_Radial_D5.0mm_P2.50mm | C19 |
| 6 | 100n | C_0603 | C20, C25, C26, C27, C29, C201 |
| 2 | 20p | C_0603 | C23, C24 |
| 1 | 1u | C_0603 | C202 |
| 1 | 1M | R_0603 | R10 |
| 1 | 4k7 | R_0603 | R11 |
| 4 | 10k | R_0603 | R12, R14, R17, R18 |
| 5 | 0 | R_0603 | R13, R26, R27, R42, R43 |
| 5 | 120 | R_0603 | R15, R16, R19, R40, R44 |
| 1 | R | R_0603 | R41 |
Can uart board design files
The KiCad project lives in the bpmasc/can-uart-board repository on GitHub; these links point at the commit this page was built from.
Can uart board: common questions
What microcontroller does the Can uart board use?
The Can uart board is built around the STM32F091RBTx, from the STM32 family.
How big is the Can uart board?
The Can uart board measures 58 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Can uart board?
59 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Can uart board design files?
From the bpmasc/can-uart-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Can uart board design in my own project?
The repository has no license, so all rights stay with bpmasc. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Can uart board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k