ACS V placa
About the ACS V placa PCB
ACS V placa is an open source PCB design by BraulioRom20, published on GitHub. It is a 2-layer board measuring 17.7 × 12.5 mm, with 8 components from 6 distinct parts.
By type, the board carries 4 resistors, 2 connectors and 2 capacitors.
It belongs with the rf & radio designs in this gallery.
From the project
Código de la Computadora del Auto 78 del Desafío ECO YPF 2025
Esquemas y PCB de KICAD para la computadora del auto del "Desafío ECO YPF" y sus submódulos.
Computadora basada en un ESP32, una pantalla led ILI9844 montada en el volante(SPI), un acelerometro(MPU6050), modulo GPS(NEO6M) y un modulo LORA(XL1278).
Adaptación del módulo SMT1278 LoRa a un conector de 5 pines (header de 2.54 mm).
Aquí es donde los terminales de las baterías se conectan al sensor de corriente ACS712 (30A) y al divisor de voltaje.
ACS V placa bill of materials (BOM)
8 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BATERIA_AUTO | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | Cableado_hacia_auto | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J3 |
| 2 | C | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | C1, C2 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | 220k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7 |
| 1 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8 |
ACS V placa design files
The KiCad project lives in the BraulioRom20/AutoYPF78 repository on GitHub; these links point at the commit this page was built from.
ACS V placa: common questions
How big is the ACS V placa PCB?
The ACS V placa measures 17.7 × 12.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ACS V placa?
8 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the ACS V placa design files?
From the BraulioRom20/AutoYPF78 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ACS V placa design in my own project?
The repository has no license, so all rights stay with BraulioRom20. Use it as a reference, and ask the author before reusing the design.
More boards in AutoYPF78
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372