Super-8-Camera
breilly1296·Super-8-Camera
About the Super-8-Camera PCB
Super-8-Camera is an open source STM32 PCB design by breilly1296, published on GitHub. It is a board, with 39 components from 23 distinct parts.
Its main chip is the STM32L031K6T6, from the STM32 family. Other key parts include the DRV8837DSGR, MCP6001T-I/OT, AMS1117-5.0 and AMS1117-3.3. By type, the board carries 12 capacitors, 8 resistors, 6 diodes, 5 ICs, 3 connectors and 3 switches.
From the project
An open-source, self-repairable Super 8 film camera.
An open-source, self-repairable Super 8 film camera.
A fully parametric motion picture camera designed from scratch in CadQuery. Every dimension traces back to a single spec file. Every part is manufacturable. 7 field-swappable modules. 10 FDM-printable replacement parts. A complete repair manual generated from the design itself.
The camera is organized into 7 field-swappable modules. Each module can be removed and replaced independently without disassembling the rest of the camera.
Main components on the Super-8-Camera
Super-8-Camera bill of materials (BOM)
39 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L031K6T6 | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DRV8837DSGR DRV8837 | WSON-8_2x2mm_P0.5mm | U2 |
| 1 | MCP6001T-I/OT MCP6001 | SOT-23-5 | U3 |
| 1 | AMS1117-5.0 | SOT-223-3 | U4 |
| 1 | AMS1117-3.3 | SOT-223-3 | U5 |
| 1 | SI2301CDS-T1-GE3 SI2301 | SOT-23 | Q1 |
| 1 | B4B-PH-K-S JST_PH_4pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | B2B-PH-K-S JST_PH_2pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | ISP_6PIN ISP_6pin | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | MF-MSMF050-2 500mA | Fuse_1206 | F1 |
| 1 | Trigger | SW_Push_SPST | SW1 |
| 1 | FPS_Toggle | SW_Toggle_SPDT | SW2 |
| 1 | DIP_2POS DIP_2pos | DIP-02_SMD | SW3 |
| 1 | BPW34 | BPW34_DIL | D1 |
| 3 | LED_Red | LED_0603 | D2, D4, D6 |
| 1 | LED_Green | LED_0603 | D3 |
| 1 | LED_Yellow | LED_0603 | D5 |
| 1 | 10PF 10pF | C_0603 | C1 |
| 6 | 100NF 100nF | C_0603 | C10, C11, C12, C13, C14, C15 |
| 5 | 10UF 10uF | C_0805 | C20, C21, C22, C23, C24 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R_0603 | R1 |
| 2 | 10K | R_0603 | R2, R3 |
| 5 | 330 | R_0603 | R4, R5, R6, R7, R8 |
Super-8-Camera design files
The KiCad project lives in the breilly1296/Super-8-Camera repository on GitHub; these links point at the commit this page was built from.
- Schematicsuper8_camera.kicad_sch
- Netlistsuper8_camera.net
- BOMsuper8_camera_bom.csv
Super-8-Camera: common questions
What microcontroller does the Super-8-Camera use?
The Super-8-Camera is built around the STM32L031K6T6, from the STM32 family.
How many components are on the Super-8-Camera?
39 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Super-8-Camera design files?
From the breilly1296/Super-8-Camera repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Super-8-Camera design in my own project?
The repository has no license, so all rights stay with breilly1296. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Super-8-Camera without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k