HardLabs

ArmLEDsPrototype

Brelee2222·ArmLEDsPrototype

ArmLEDsPrototype PCB layout, top view — open source AVR/Arduino board by Brelee2222

About the ArmLEDsPrototype PCB

ArmLEDsPrototype is an open source AVR/Arduino PCB design by Brelee2222, published on GitHub. It is a 2-layer board measuring 80.5 × 54.6 mm, with 33 components from 12 distinct parts.

Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. By type, the board carries 12 capacitors, 6 resistors, 4 connectors, 4 switches, 3 ICs and 3 inductors.

Main components on the ArmLEDsPrototype

Arduino_Nano_Every

ArmLEDsPrototype bill of materials (BOM)

33 components, 12 distinct parts.

QtyPartRefs
3
~
U1, U2, U3
1
Arduino_Nano_Every
A1
1
Conn_01x08
J1
2
Conn_01x02
J3, J6
1
Conn_01x03
J5
1
RotaryEncoder_Switch
SW1
3
RotaryEncoder
SW2, SW3, SW4
3
L
L1, L2, L3
3
C
C1, C5, C9
3
C
C2, C6, C10
6
C
C3, C4, C7, C8, C11, C12
6
R
R9, R10, R11, R12, R13, R14

ArmLEDsPrototype design files

The KiCad project lives in the Brelee2222/ArmLEDsPrototype repository on GitHub; these links point at the commit this page was built from.

ArmLEDsPrototype: common questions

What microcontroller does the ArmLEDsPrototype use?

The ArmLEDsPrototype is built around the Arduino_Nano_Every, from the AVR/Arduino family.

How big is the ArmLEDsPrototype PCB?

The ArmLEDsPrototype measures 80.5 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArmLEDsPrototype?

33 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArmLEDsPrototype design files?

From the Brelee2222/ArmLEDsPrototype repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ArmLEDsPrototype design in my own project?

The repository has no license, so all rights stay with Brelee2222. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArmLEDsPrototype without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards