Radio-86RK-Video-Output

BrettHallen·Radio-86RK-Video-Output·RCA_output/Radio_86RK_Video_output.kicad_pcb

Radio-86RK-Video-Output PCB layout, top view — open source board by BrettHallen

About the Radio-86RK-Video-Output PCB

Radio-86RK-Video-Output is an open source PCB design by BrettHallen, published on GitHub. It is a 2-layer board measuring 45.2 × 21.1 mm, with 10 components from 9 distinct parts.

By type, the board carries 5 resistors, 2 connectors, 2 capacitors and 1 transistor.

It belongs with the rf & radio designs in this gallery.

From the project

Discrete video output stage for 86RK-based computers

Yes yes, "composite" means colour/luma+chroma but the machine outputs a luma/B&W-only video signal ... but you know what I mean ... the yellow RCA jack.

The Intel 8275 (Soviet: КР580ВГ75) generates horizontal (HRTC) and vertical (VRTC) retrace signals which are combined with the character bitstream (character ROM to shift register) to produce the video output. The image above shows one scanline with text - the negative-going pulses are HRTC & VRTC, the positive-going are character bits.

Radio-86RK-Video-Output, from the project README
From the project README

Radio-86RK-Video-Output bill of materials (BOM)

10 components, 9 distinct parts.

QtyPartRefs
1
2N3904
Q1
1
RCJ-014
VIDEO_OUT
J1
1
Conn_01x04_Pin
J2
1
22nF
C1
1
47µF
C2
1
1.5kΩ
R1
2
1kΩ
R2, R3
1
75Ω
R4
1
150Ω
R5

Radio-86RK-Video-Output design files

The KiCad project lives in the BrettHallen/Radio-86RK-Video-Output repository on GitHub; these links point at the commit this page was built from.

Radio-86RK-Video-Output: common questions

How big is the Radio-86RK-Video-Output PCB?

The Radio-86RK-Video-Output measures 45.2 × 21.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Radio-86RK-Video-Output?

10 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Radio-86RK-Video-Output design files?

From the BrettHallen/Radio-86RK-Video-Output repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Radio-86RK-Video-Output design in my own project?

The repository has no license, so all rights stay with BrettHallen. Use it as a reference, and ask the author before reusing the design.

Similar boards