HinchOSHWi
About the HinchOSHWi PCB
HinchOSHWi is an open source NXP PCB design by brico-labs, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 49 components from 21 distinct parts.
Its main chip is the Teensy3.2, from the NXP family. Other key parts include the LM7805_TO220. By type, the board carries 13 connectors, 10 LEDs, 10 diodes, 2 ICs and 2 capacitors.
Main components on the HinchOSHWi
HinchOSHWi bill of materials (BOM)
49 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.2 | Teensy30_31_32_LC | U1 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U2 |
| 1 | Fan1 | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Fan2 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Fan3 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Fan4 | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Fan5 | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Fan6 | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | Fan7 | TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Fan8 | TerminalBlock_bornier-2_P5.08mm | J8 |
| 1 | Fan9 | TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | Fan10 | TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | izq | PinSocket_1x14_P2.54mm_Vertical | J12 |
| 1 | dcha | PinSocket_1x14_P2.54mm_Vertical | J13 |
| 1 | inf | PinSocket_1x05_P2.54mm_Vertical | J14 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10K |
| 1 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 330R |
| 10 | RFP50N06 | TO-220-3_Vertical | MOS_1, MOS_2, MOS_3, MOS_4, MOS_5, MOS_6, MOS_7, MOS_8 +2 |
| 10 | LED | LED_D3.0mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +2 |
| 10 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CP | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
HinchOSHWi design files
The KiCad project lives in the brico-labs/HinchOSHWi repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/pcb pulpo.kicad_pcb
HinchOSHWi: common questions
What microcontroller does the HinchOSHWi use?
The HinchOSHWi is built around the Teensy3.2, from the NXP family.
How big is the HinchOSHWi PCB?
The HinchOSHWi measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HinchOSHWi?
49 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the HinchOSHWi design files?
From the brico-labs/HinchOSHWi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the HinchOSHWi design in my own project?
Yes, under the terms of its MIT license, which brico-labs chose for the repository.
Can I test firmware for the HinchOSHWi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532