20 open source boards using the Teensy3.2
Real designs built with the Teensy3.2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPSnackymini keyboard
huytd
257.8 × 94 mm91 parts2LNo license32
NXPArcadeTrackballMouse
ManiacalLabs
40.5 × 68 mm12 parts2LNo license28
NXPCore64 LB v0.6
ageppert
85 × 170 mm136 parts2LGPL-3.016
NXPCAN-CCD bus
xerootg
107.7 × 85.1 mm83 parts2LNo license12
AVR/ArduinoNova 1200 front panel
ForgottenMachines
397.5 × 119.4 mm203 parts2LNo license5
NXPV4.2
brunob45
48.9 × 52.7 mm49 parts2LNo license5
NXPDriver
augustt198
54.6 × 127 mm62 parts2LNo license4
NXPPcb bcu2
geertu
106.1 × 91.4 mm86 parts2LNo license3
NXPV4.1
48.9 × 52.7 mm48 parts2LNo license5
NXPImpact pal
tpcarlson
40.3 × 128.5 mm175 parts2LNo license106
NXPV4.0
48.9 × 52.7 mm43 parts2LNo license5
NXPMegaduino
48.9 × 52.7 mm38 parts2LNo license5
NXPV3.0
39.4 × 52.1 mm37 parts2LNo license5
NXPLidarBoard-2023
LesKaribous
68.8 × 76.2 mm14 parts2LMIT3
NXPV2.0
40 × 52.7 mm36 parts2LNo license5
NXPV2.1
40 × 52.7 mm36 parts2LNo license5
NXPTravelModule-2023
27 × 54 mm7 parts2LMIT3
NXPV2.2
39.4 × 52.1 mm36 parts2LNo license5
Nordic nRFSenseRx rev1
Appiko
96 × 69 mm36 parts2LCERN-OHL-1.22
NXPV1.0
40 × 52.7 mm29 parts2LNo license5
The Teensy3.2 in open source designs
The gallery holds 20 open source boards using the Teensy3.2 from 11 GitHub repositories; a typical one measures about 48.9 × 61 mm and carries around 41 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Impact pal by tpcarlson.
Microcontrollers on boards using the Teensy3.2
What boards using the Teensy3.2 are built for
Teensy3.2: common questions
Where can I find a Teensy3.2 reference design?
Each of the 20 boards on this page is a real design using the Teensy3.2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy3.2 use?
Most are built on NXP (18), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the Teensy3.2?
The median is 48.9 × 61 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy3.2?
By GitHub stars, Impact pal by tpcarlson, with 106 stars.
Can I simulate one of these boards using the Teensy3.2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.