Basic theremin
bristol-communal-modular·basic-theremin·kicad/theremin.kicad_pcb
About the Basic theremin PCB
Basic theremin is an open source PCB design by bristol-communal-modular, published on GitHub. It is a 2-layer board measuring 146 × 91 mm, with 42 components from 24 distinct parts.
Other key parts include the 4069, LM386 and LP2950-5.0_TO92. By type, the board carries 13 resistors, 12 capacitors, 4 ICs, 4 diodes, 2 test points and 1 connector.
From the project
A basic theremin for a potential workshop
Main components on the Basic theremin
Basic theremin bill of materials (BOM)
42 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4069 | DIP-14_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | LM386 | DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | LP2950-5.0_TO92 | TO-92_Inline_Wide | U4 |
| 1 | WQP-WQP518MA Eurorack Mono Jack | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J1 |
| 1 | 9V | BatteryHolder_Eagle_12BH611-GRMODDEDBYROBIN | BT1 |
| 1 | Speaker | 40mmSpeakerdropin | LS1 |
| 1 | 10K 10k | Potentiometer_THT_Bourns_3306P_Vertical | RV1 |
| 1 | 25K 25k | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV2 |
| 1 | 1k | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV3 |
| 1 | SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 2 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | TP1, TP2 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D4 |
| 1 | LED | LED_D5.0mm | D3 |
| 2 | 100PF 100pF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C1, C2 |
| 2 | 100NF 100nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C3, C12 |
| 2 | 10NF 10nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C4, C5 |
| 5 | 10UF 10uF | CP_Radial_D5.0mm_P2.50mm | C6, C8, C9, C10, C11 |
| 1 | 47NF 47nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C7 |
| 4 | 270K 270k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R8, R12 |
| 3 | 27K 27k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R11 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R7 |
| 1 | 10R 10r | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 100R 100r | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
Basic theremin design files
The KiCad project lives in the bristol-communal-modular/basic-theremin repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/theremin.kicad_pcb
- Schematickicad/theremin.kicad_sch
- BOMbuild/clara-bom.csv
Basic theremin: common questions
How big is the Basic theremin PCB?
The Basic theremin measures 146 × 91 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basic theremin?
42 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Basic theremin design files?
From the bristol-communal-modular/basic-theremin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Basic theremin design in my own project?
The repository has no license, so all rights stay with bristol-communal-modular. Use it as a reference, and ask the author before reusing the design.