32 open source boards using the 4069
Real designs built with the 4069, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Klangorium
hexagon5un
200 × 100 mm152 parts2LNo license65AVR/Arduino
OpenTheremin V3 Shield
GaudiLabs
60 × 100 mm84 parts2LGPL-3.045Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 Wasp 0.3
zero-emission
65 × 85 mm57 parts2LNo license14STM32
OpenDrive-Programmer
soniccd123
83.3 × 92.7 mm48 parts2LNo license6GSE14
stonedDiscord
163 × 249 mm102 parts2LBSD-2-Clause5Radio usb interface
SP8EBC
127 × 90 mm200 parts2LNo license3079721-2351
jawamustang
159.9 × 154.1 mm210 parts2LNo license2Nintendo Famicom Keyboard HVC-007
BrettHallen
380 × 160 mm100 parts2LNo license21802-Mini-Pixie-Video
dmadole
100 × 100 mm49 parts2LGPL-3.02Lyrebird Keyboard Tone Generator
Celcius1
85.1 × 75.2 mm111 parts2LGPL-3.01Dtk-386-replica
youxiaojie
175 × 220.4 mm173 parts4LGPL-3.00Lickshot dub siren
Orald-0
99.1 × 63.5 mm78 parts2LMIT0MapEletro
Heymity
250 × 200 mm52 parts2LNo license0Basic theremin
bristol-communal-modular
146 × 91 mm42 parts2LNo license0Makerspace Access Control
ttstam
150 × 77 mm38 parts2LNo license0- schematic only · 13 parts
8x8 memory cell rtl
TIShoueb
13 partsNo license0 Backup
danwerner21
333.2 × 205.9 mm218 parts2LNo license34Wasp 0.5
zero-emission
50 × 80.5 mm57 parts2LNo license14Tiwi prototype
jekhor
83.8 × 50.8 mm19 parts2LNo license0Power board
FOSDEM
109.5 × 76 mm150 parts2LNo license114Backup1
danwerner21
333.2 × 205.9 mm218 parts2LNo license34Wasp 0.2
zero-emission
65 × 85 mm56 parts2LNo license14KeyboardScanner
stefanhepp
150 × 100 mm32 parts2LCC-BY-SA-4.00L293d motor controller
Krzysiek-Mistrz
49.6 × 66 mm14 parts2LNo license0VCO
PancakeLegend
50 × 100 mm41 parts2LGPL-3.02AVR/Arduino
PedalEncoder
stefanhepp
125 × 38.5 mm31 parts2LCC-BY-SA-4.00AVR/Arduino
PistonEncoder
stefanhepp
150 × 100 mm28 parts2LCC-BY-SA-4.00ServoTester
eyalo-dev
113 × 67.9 mm27 parts2LNo license0GIMIX BaudRateGenerator
roberto314
58.4 × 83.8 mm19 parts2LBSD-2-Clause13-phase lfo
tpcarlson
30 × 128.5 mm70 parts2LNo license106
How designs wire the 4069
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the 4069 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 12 of 24 designs, most often 100 nF (then 10 µF).
- Pin 3 has a series resistor on 10 of 24 designs, most often 22 kΩ (then 27 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 21% |
|
| Pin 3 | Connected to: Signal 75% |
|
| VSSpin 7 | Connected to: GND 92% | — |
| Pin 11 | Connected to: Signal 58% · not connected 21% · GND 21% |
|
| VDDpin 14 | Connected to: 5V 92% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power board by FOSDEM, 3-phase lfo by tpcarlson, Klangorium by hexagon5un and OpenTheremin V3 Shield by GaudiLabs.
The 4069 in open source designs
The gallery holds 32 open source boards using the 4069 from 26 GitHub repositories; a typical one measures about 119 × 96.4 mm and carries around 57 components.
97% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is Power board by FOSDEM.
Microcontrollers on boards using the 4069
What boards using the 4069 are built for
4069: common questions
Where can I find a 4069 reference design?
Each of the 32 boards on this page is a real design using the 4069. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4069 VDD pin?
The VDD pin has a decoupling capacitor on 12 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the 4069.
What resistor goes on the 4069 pin 3?
Pin 3 has a series resistor on 10 of 24 designs, most often 22 kΩ (then 27 kΩ). Counted from the KiCad layouts of 24 open source designs using the 4069.
What parts are used alongside the 4069?
The 74LS244, L7805, 4013, 4081 and 74LS00 appear in the most repositories here.
Which microcontrollers do boards using the 4069 use?
Most are built on AVR/Arduino (3) and STM32 (1).
How big is a typical board using the 4069?
The median is 119 × 96.4 mm, and 97% are two-layer designs.
What is the most popular open source board using the 4069?
By GitHub stars, Power board by FOSDEM, with 114 stars.
Can I simulate one of these boards using the 4069 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.