F405 pill

BrMisha·F405_pill·F405_pill_V1.1/F405_pill.kicad_pcb

F405 pill PCB layout, top view — open source STM32 board by BrMisha

About the F405 pill PCB

F405 pill is an open source STM32 PCB design by BrMisha, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 54.1 × 26.6 mm, with 74 components from 41 distinct parts.

Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the TCAN1051HDR, LM1117-3.3, HT7550, C94021 and C71459. By type, the board carries 33 capacitors, 15 resistors, 10 jumpers, 8 ICs, 3 diodes and 2 connectors.

From the project

Xtal caps from 18pF to 12pF Separate the two LEDs from the single resistor CAN spike protection RC between GND and pb12 to stop false trips PC12->PA15 to drive LED Increased functionality of several header pins * Review this document for pin changes

Xtal caps from 18pF to 12pF Separate the two LEDs from the single resistor CAN spike protection RC between GND and pb12 to stop false trips PC12->PA15 to drive LED Increased functionality of several header pins * Review this document for pin changes

* Jumper to disable CAN termination resistor on bottom side of board

F405 pill, from the project README
From the project README

Main components on the F405 pill

F405 pill bill of materials (BOM)

74 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F405RGTX
STM32F405RGTx
U1
1
TCAN1051HDR
TJA1050T/CM,118
U2
1
LM1117-3.3
U3
1
HT7550
U5
1
C94021
BMI160
U6
1
C71459
MPU-9250
U7
1
C95230
LSM6DS3
U8
1
C2836813
BMI270
U9
1
C115962
8MHz
Y1
1
TYPE-C-31-M-12
J4
1
Conn_01x02
J5
2
Jumper_2_Open
JP1, JP2
4
SDA
JP3, JP5, JP7, JP9
4
SCL
JP4, JP6, JP8, JP10
1
C130724
BLU
D1
1
C130723
GRN
D2
1
C90692
RED
D3
1
39N
39n
L1
1
39n
L2
1
4U7
4u7
C1
Show 21 more
QtyPartRefs
8
100N
100n
C2, C4, C7, C10, C12, C17, C18, C19
2
C1554
20pF
C3, C6
2
1u
C5, C30
1
10N
10n
C8
2
2U2
2u2
C9, C11
1
4.7N
4.7n
C13
2
100P
100p
C14, C15
1
10U
10u
C16
1
100N
100n
C20
2
10n
C21, C31
1
10u
C22
9
100n
C23, C24, C25, C26, C27, C28, C29, C32 +1
2
10K
10k
R1, R2
2
C101133
100Ω
R3, R4
2
20k
R5, R7
1
47R
R6
2
1k
R8, R12
1
20K
20k
R9
2
5.1K
5.1k
R10, R11
2
C17526
2.4K
R13, R14
1
C26083
1M
R15

F405 pill design files

The KiCad project lives in the BrMisha/F405_pill repository on GitHub; these links point at the commit this page was built from.

F405 pill: common questions

What microcontroller does the F405 pill use?

The F405 pill is built around the STM32F405RGTX, from the STM32 family.

How big is the F405 pill PCB?

The F405 pill measures 54.1 × 26.6 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the F405 pill?

74 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the F405 pill design files?

From the BrMisha/F405_pill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the F405 pill design in my own project?

Yes, under the terms of its BSD-3-Clause license, which BrMisha chose for the repository.

Can I test firmware for the F405 pill without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards