Kc1fsz tjdcr
brucemack·kc1fsz-tjdcr·hw/tjdcr-1/tjdcr-1.kicad_pcb
About the Kc1fsz tjdcr PCB
Kc1fsz tjdcr is an open source PCB design by brucemack, published on GitHub. It is a 4-layer board measuring 100 × 35 mm, with 69 components from 42 distinct parts.
By type, the board carries 25 capacitors, 21 resistors, 7 connectors, 6 transistors, 5 transformers and 3 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
A PCB version of the Thomas Jefferson Direct Conversion Receiver designed as part of the Solder Smoke DCR Challenge.
This is my compact PCB implementation of the famous Thomas Jefferson Direct Conversion Receiver designed by Bill Meara (N2CQR) and Dean Souleles (KK4DAS). Full documentation for the original rig can be found here. This project has been discussed at length on the excellent Solder Smoke Podcast and in a detailed series of videos that can be found starting here. I would particularly encourage you to watch Dean's superb tutorial series on YouTube.

Kc1fsz tjdcr bill of materials (BOM)
69 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MMBT3904 | SOT-23 | Q1, Q3, Q5, Q40 |
| 1 | MMBFJ310 | SOT-23 | Q2 |
| 1 | 2N3904 | TO-92_Inline | Q4 |
| 1 | Antenna (50 ohms) | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Tuning | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Power | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LO Option | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Volume | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | TX Offset | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | 5:28 | Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30 | T1 |
| 1 | 28:5 | Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30 | T2 |
| 1 | Trifilar Toroid | SmallTrifilar | T3 |
| 1 | Trifiliar Toroid | SmallTrifilar | T4 |
| 1 | 42TL013-RC | 42TL013RC | T5 |
| 1 | 8.2V BZX84Cxx (BZX84C8V2LT1G) | SOT-23 | D1 |
| 2 | BAT54S | SOT-23 | D25, D34 |
| 1 | 10u | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 1 | 100u | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L11 |
| 2 | 660p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 130p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 6 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C21, C41 |
| 2 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C14 |
| 3 | 470u (Size 2917/7343) | CP_EIA-7343 | C9, C11, C13 |
| 3 | 47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C12, C15 |
| 1 | 0.47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 33u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 2 | 150p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 1 | 10p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 3 | C_Variable | VCAP_GKG30086-05_SGM-L | C40, C181, C191 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 3 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R14 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 47 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 3 | 14.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R12, R16 |
| 3 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R13, R17 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R18 |
| 2 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R19 |
| 1 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40 |
| 1 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41 |
Kc1fsz tjdcr design files
The KiCad project lives in the brucemack/kc1fsz-tjdcr repository on GitHub; these links point at the commit this page was built from.
- Layouthw/tjdcr-1/tjdcr-1.kicad_pcb
- Schematichw/tjdcr-1/tjdcr-1.kicad_sch
Kc1fsz tjdcr: common questions
How big is the Kc1fsz tjdcr PCB?
The Kc1fsz tjdcr measures 100 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kc1fsz tjdcr?
69 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kc1fsz tjdcr design files?
From the brucemack/kc1fsz-tjdcr repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kc1fsz tjdcr design in my own project?
The repository has no license, so all rights stay with brucemack. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568