DSKY status light board
bsakel·dsky-ha-terminal·hardware/pcb/status-board/status_board.kicad_pcb
About the DSKY status light board
DSKY status light board is an open source PCB design by bsakel, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 60.5 × 106.1 mm, with 23 components from 5 distinct parts.
By type, the board carries 11 capacitors, 10 diodes, 1 connector and 1 resistor.
From the project
Both boards were routed and checked with the generator's own clearance and connectivity checks:
Both boards were routed and checked with the generator's own clearance and connectivity checks:
- 0.2 mm copper clearance and 0.4 mm to the board edge. - No errors and no unconnected nets.
1. Check the footprints against real parts. - Open lib/dsky.pretty in the footprint editor. - GateronLPHotswap. Check it against your socket's datasheet: the centre hole is 5.1 mm, the two pin holes are 3.0 mm, and the pads are on the back. Print the board 1:1 on paper and lay a switch on it. - RP2040-Zero. Check the pad pitch and pin names against the Waveshare drawing. The module is soldered to the back…
DSKY status light board bill of materials (BOM)
23 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | +5V DIN GND | Conn_1x03_P2.54 | J1 |
| 10 | WS2812B-B/T WS2812B | WS2812B_5050 | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 10 | CC0603KRX7R9BB104 100nF | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 1 | CL21A106KAYNNNE 10uF | C_0805 | C11 |
| 1 | 0603WAF3300T5E 330R | R_0603 | R1 |
DSKY status light board design files
The KiCad project lives in the bsakel/dsky-ha-terminal repository on GitHub; these links point at the commit this page was built from.
DSKY status light board: common questions
How big is the DSKY status light board?
The DSKY status light board measures 60.5 × 106.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DSKY status light board?
23 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSKY status light board design files?
From the bsakel/dsky-ha-terminal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DSKY status light board design in my own project?
Yes, under the terms of its GPL-3.0 license, which bsakel chose for the repository.