DSKY PCB panel (keyboard + status light board)

bsakel·dsky-ha-terminal·hardware/pcb/panel/dsky_panel.kicad_pcb

DSKY PCB panel (keyboard + status light board) layout, top view — open source RP2040/RP2350 board by bsakel

About the DSKY PCB panel (keyboard + status light board)

DSKY PCB panel (keyboard + status light board) is an open source RP2040/RP2350 PCB design by bsakel, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 230.5 × 106.1 mm, with 67 components from 28 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the C7484. By type, the board carries 29 diodes, 19 switches, 13 capacitors, 2 ICs, 2 connectors and 2 resistors.

It belongs with the keyboards designs in this gallery.

From the project

Both boards were routed and checked with the generator's own clearance and connectivity checks:

Both boards were routed and checked with the generator's own clearance and connectivity checks:

- 0.2 mm copper clearance and 0.4 mm to the board edge. - No errors and no unconnected nets.

1. Check the footprints against real parts. - Open lib/dsky.pretty in the footprint editor. - GateronLPHotswap. Check it against your socket's datasheet: the centre hole is 5.1 mm, the two pin holes are 3.0 mm, and the pads are on the back. Print the board 1:1 on paper and lay a switch on it. - RP2040-Zero. Check the pad pitch and pin names against the Waveshare drawing. The module is soldered to the back…

Main components on the DSKY PCB panel (keyboard + status light board)

DSKY PCB panel (keyboard + status light board) bill of materials (BOM)

67 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040-Zero
U1
1
C7484
74AHCT1G125
U2
1
to status board
J1
1
+5V DIN GND
J101
1
VERB
SW1
1
NOUN
SW2
1
ENTR
SW3
1
RSET
SW4
1
+
SW5
1
7
SW6
1
8
SW7
1
9
SW8
1
CLR
SW9
1
-
SW10
1
4
SW11
1
5
SW12
1
6
SW13
1
PRO
SW14
1
0
SW15
1
1
SW16
Show 8 more
QtyPartRefs
1
2
SW17
1
3
SW18
1
KEY REL
SW19
19
C81598
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +11
10
C2761795
WS2812B
D101, D102, D103, D104, D105, D106, D107, D108 +2
11
C14663
100nF
C1, C101, C102, C103, C104, C105, C106, C107 +3
2
C15850
10uF
C2, C111
2
C23138
330R
R1, R101

DSKY PCB panel (keyboard + status light board) design files

The KiCad project lives in the bsakel/dsky-ha-terminal repository on GitHub; these links point at the commit this page was built from.

DSKY PCB panel (keyboard + status light board): common questions

What microcontroller does the DSKY PCB panel (keyboard + status light board) use?

The DSKY PCB panel (keyboard + status light board) is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the DSKY PCB panel (keyboard + status light board)?

The DSKY PCB panel (keyboard + status light board) measures 230.5 × 106.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DSKY PCB panel (keyboard + status light board)?

67 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DSKY PCB panel (keyboard + status light board) design files?

From the bsakel/dsky-ha-terminal repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DSKY PCB panel (keyboard + status light board) design in my own project?

Yes, under the terms of its GPL-3.0 license, which bsakel chose for the repository.

Can I test firmware for the DSKY PCB panel (keyboard + status light board) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in dsky-ha-terminal

Similar boards